www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Release 2.0.RC1 not connected PPPoE

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
pomidorov



Joined: 12 Nov 2010
Posts: 7
Location: Ukraine

PostPosted: Mon Jul 30, 2012 7:47 am    Post subject: Release 2.0.RC1 not connected PPPoE Reply with quote

After upgrade to release 2.0.RC1 missing PPPoE connection

09:29:16 pppd 2.4.3 started by root, uid 0
09:29:16 Using interface ppp0
09:29:16 Connect: ppp0 <--> /dev/pts/0
09:29:18 Modem hangup
09:29:18 Connection terminated.
09:29:18 Exit.
Back to top
View user's profile Send private message
Matze



Joined: 02 Aug 2012
Posts: 4

PostPosted: Thu Aug 02, 2012 7:50 am    Post subject: Reply with quote

I must agree. After update to 2.0 RC1 ppoe become not connect!. I switch back to beta16...
Please inform if the error-corrected.

Log:
09:48:05 pppd 2.4.3 started by root, uid 0
09:48:05 Using interface ppp0
09:48:05 Connect: ppp0 <--> /dev/pts/0
09:48:20 LCP terminated by peer
09:48:20 Modem hangup
09:48:20 Connection terminated.
09:48:20 Exit.
09:48:25 pppd 2.4.3 started by root, uid 0
09:48:25 Using interface ppp0
09:48:25 Connect: ppp0 <--> /dev/pts/0
09:48:56 LCP: timeout sending Config-Requests
09:48:56 Connection terminated.
09:48:56 Using interface ppp0
09:48:56 Connect: ppp0 <--> /dev/pts/1
09:49:01 tcflush failed: Bad file descriptor
09:49:01 Exit.
Back to top
View user's profile Send private message
Alderon



Joined: 23 Jun 2011
Posts: 20

PostPosted: Sat Aug 04, 2012 5:03 pm    Post subject: Reply with quote

I have the same experience with PPPoE.
Back to top
View user's profile Send private message
njtcjack



Joined: 06 Aug 2012
Posts: 1

PostPosted: Mon Aug 06, 2012 1:28 am    Post subject: Reply with quote

Me too. I used Zeroshell 2.0 RC1 can't pppoe connect。
Back to top
View user's profile Send private message
aemarx



Joined: 15 Jul 2010
Posts: 17

PostPosted: Mon Aug 06, 2012 2:31 pm    Post subject: Reply with quote

happen to me 2 or 3 times after every upgrade.
try hard reset the modem.
it work for me.
Back to top
View user's profile Send private message
primodust



Joined: 06 Aug 2012
Posts: 2

PostPosted: Mon Aug 06, 2012 4:03 pm    Post subject: Reply with quote

How can solve this issue?
Back to top
View user's profile Send private message
primodust



Joined: 06 Aug 2012
Posts: 2

PostPosted: Tue Aug 07, 2012 3:24 am    Post subject: Reply with quote

hi everyone I've spent the whole day trying to configure my adsl with no success, and other issue is the dyndns, i have a custom dyndns name but zeroshell don't accept the configuration. any help with this two issues are welcome. Thanks.
Back to top
View user's profile Send private message
P1LoT



Joined: 14 Aug 2012
Posts: 1

PostPosted: Tue Aug 14, 2012 3:31 pm    Post subject: Re: Release 2.0.RC1 not connected PPPoE Reply with quote

pomidorov wrote:
After upgrade to release 2.0.RC1 missing PPPoE connection

09:29:16 pppd 2.4.3 started by root, uid 0
09:29:16 Using interface ppp0
09:29:16 Connect: ppp0 <--> /dev/pts/0
09:29:18 Modem hangup
09:29:18 Connection terminated.
09:29:18 Exit.


I had the same problem. But I solved it!
For its decision it is necessary to make the following:
1. To start SSH server and also be connected to it.
2. To pass to a console mode.
3. In folder /etc/ppp/ remove the resolv.conf file.
4. Run pppoe-setup script, to a question of DNS answer "server", on a question to use the rules iptables answer - not to use.
5. Run pppoe-start script. If you use SSH client, simply close it.
It works! But I didn't try to reboot the server. Probably settings can't save.
P.S.: Excuse for my English, I used the translator...
Back to top
View user's profile Send private message
Alderon



Joined: 23 Jun 2011
Posts: 20

PostPosted: Tue Aug 14, 2012 8:54 pm    Post subject: Reply with quote

Yes, it works. I didn`t removed the resolv.conf file, it works too. After reboot all modifications are discarded because root filesystem is loaded into ram. pppoe.conf is created with script in /root/kerbynet.cgi/scripts (it`s loaded to ram too), but i am linux novice and don`t know if it is possible to find this script somewhere on hdd and modify.
Back to top
View user's profile Send private message
pomidorov



Joined: 12 Nov 2010
Posts: 7
Location: Ukraine

PostPosted: Thu Aug 16, 2012 7:25 pm    Post subject: Reply with quote

Thank you, P1LoT!
But I have another problem. It's work only few seconds.
Back to top
View user's profile Send private message
Alderon



Joined: 23 Jun 2011
Posts: 20

PostPosted: Sun Aug 26, 2012 5:56 pm    Post subject: Reply with quote

Here is working solution http://www.zeroshell.net/eng/forum/viewtopic.php?t=3650
Back to top
View user's profile Send private message
pomidorov



Joined: 12 Nov 2010
Posts: 7
Location: Ukraine

PostPosted: Mon Aug 27, 2012 6:34 pm    Post subject: Reply with quote

Alderon wrote:
Here is working solution http://www.zeroshell.net/eng/forum/viewtopic.php?t=3650

Thank you!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group