www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

cannot create new profile ZS-2.0RC1 ALIX img file

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
knura



Joined: 24 Jan 2011
Posts: 10

PostPosted: Sat Sep 29, 2012 1:22 pm    Post subject: cannot create new profile ZS-2.0RC1 ALIX img file Reply with quote

I have dd'd the ALIX img file to a 2GB CF. Installed the CFs to an ALIX board it boots fine with the "default" profile.

However when I try to create a new profile on the "Profiles" web page, I see:

/dev/sda3 "Unknown filesystem"

See screenshot:
http://imagebin.org/230229

When I select the radio button for /dev/sda3 to create a new profile, it offers to format /dev/sda3!

In my first attempt, I went ahead and formatted /dev/sda3. However, the system would not come up on a reboot. I think the reformat blew away the "default" profile and the FS label etc.

Second attempt, I have tried to figure out the problem.

When I select /dev/sda3 and click on "View FS" button there is no information about the file system.

I logged into the serial console and did the following:

1. fdisk -l
2. fsck.ext4 -pDf /dev/sda3
3. dumpe2fs
4. file -s <device name>
5. blkid <device name>


Output of the respective utility listed below.

fdisk is indeed showing three partitions. However fsck.ext4 is complaining that the size of the ext4 file system (331884) is larger than the /dev/sda3 device size (315424) Shocked

Booting system rescue CD (v2.8.1) along with the ALIX image file; I used the above utils and got the same results.

BTW, the 2.0RC1 Soekris image has the same manifestation for /dev/sda3.

How to create a new Profile w/o reformatting /dev/sda3?

Any work around for this?

TIA,
-- Arun Khan

Quote:


root@zeroshell root> fdisk -l

Disk /dev/sda: 1949 MB, 1949999616 bytes
255 heads, 63 sectors/track, 237 cylinders, total 3808593 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcf5090fb

Device Boot Start End Blocks Id System
/dev/sda1 63 96389 48163+ 83 Linux
/dev/sda2 96390 1285199 594405 83 Linux
/dev/sda3 1285200 4030463 1372632 83 Linux
root@zeroshell root> fsck.ext4 -pDf /dev/sda3
ZS_Profiles: The filesystem size (according to the superblock) is 331884 blocks
The physical size of the device is 315424 blocks
Either the superblock or the partition table is likely to be corrupt!


ZS_Profiles: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)


root@zeroshell root> dumpe2fs /dev/sda3 | head -n20
dumpe2fs 1.42 (29-Nov-2011)
Filesystem volume name: ZS Profiles
Last mounted on: /Database
Filesystem UUID: 227a3861-c04e-41ba-a600-1d84adc623c0
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize
Filesystem flags: signed_directory_hash
Default mount options: user_xattr acl
Filesystem state: clean with errors
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 83072
Block count: 331884
Reserved block count: 16594
Free blocks: 284034
Free inodes: 82087
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 81

root@zeroshell root> for x in 1 2 3; do file -s /dev/sda${x}; done
/dev/sda1: Linux rev 1.0 ext3 filesystem data
/dev/sda2: ISO 9660 CD-ROM filesystem data 'CDROM ' (bootable)
/dev/sda3: Linux rev 1.0 ext3 filesystem data (errors) (large files)

root@zeroshell root> for x in 1 2 3; do blkid /dev/sda${x}; done
/dev/sda1: LABEL="ZS-2.0.RC1" UUID="3d846a4a-c976-4bde-9adc-6d1ee06a4e56" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda2: LABEL="CDROM" TYPE="iso9660"
/dev/sda3: LABEL="ZS Profiles" UUID="227a3861-c04e-41ba-a600-1d84adc623c0" TYPE="ext4"

Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group