www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Wifi not visible

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
jrossbach



Joined: 04 Jun 2014
Posts: 1

PostPosted: Wed Jun 04, 2014 6:21 am    Post subject: Wifi not visible Reply with quote

Dear all,

i have a AMD APU1C4 board with AR9580 wireless network adapter

    04:00.0 Network controller: Qualcomm Atheros AR9580 Wireless Network Adapter (rev 01)
    Subsystem: Unknown device 19b6:d016
    Flags: bus master, fast devsel, latency 0, IRQ 19
    Memory at f7e00000 (64-bit, non-prefetchable) [size=128K]
    Expansion ROM at e0000000 [disabled] [size=64K]
    Capabilities: [40] Power Management version 3
    Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/2 Enable-
    Capabilities: [70] #10 [0002]



The card seems is recognized, as it is shown at the wifi manager:

    Starting WiFi subsystem ...
    --> Reloading Wi-Fi Kernel module (ath9k) ...
    Creating virtual WiFi interfaces:
    WLAN00(wlan0) (Mode:ap Sec:wpa-psk SSID:SatLink Status:up)
    WLAN00: 192.168.1.75/255.255.255.0

    REGULATORY DOMAIN: US (UNITED STATES)

    [wlan0] Qualcomm Atheros AR9580 Wireless Network Adapter (rev 01)
    -- If --- Mode -- SSID -------------------------- Hide -- WDS -- Security -
    >> WLAN00 AP SatLink no no WPA-PSK


As well, channel scanning is working:

    Using device wlan0(wlan0) for channel scanning ...

    1 WiFi channel(s) found.

    Frequency:2.437 GHz (Channel 6)

    ---------------------------------------------------------
    wlan0 Scan completed :
    Cell 01 - Address: 4C:B1:6C:14:FC:83
    Channel:6
    Frequency:2.437 GHz (Channel 6)
    Quality=36/70 Signal level=-74 dBm
    Encryption key:off
    ESSID:"WirelessNet"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
    9 Mb/s; 12 Mb/s; 18 Mb/s
    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
    Mode:Master
    Extra:tsf=0000001567b96180
    Extra: Last beacon: 268ms ago
    IE: Unknown: 000B576972656C6573734E6574
    IE: Unknown: 010882848B960C121824
    IE: Unknown: 030106


---- 8< ---- CUT

But no client is able to connect nor see the wlan access point.

Does someone have an idea how to track or check this issue?

Best regards

Rossi
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group