www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Interface Routes

Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message

Joined: 07 May 2014
Posts: 2

PostPosted: Fri Sep 26, 2014 11:38 am    Post subject: Interface Routes Reply with quote

I am just beginning to test. Eventually the project use ZeroShell to bond to asdl (only inet available there) lines between a remote location and our data center. I have configured two (WAN and LAN) of three Ethernet ports, the third being disabled for now. Right now the WAN port is behind a router for configuration and testing. Ok, here is the issue. All is apparently well and I can ping and tracert the outside world on generic setup (WAN NIC - Dhcp, LAN NIC -static IP). If I add a static route (out WAN port) to my target host, all is fine, but if I simply change the route from "gateway" to "interface" the ping and trace route to that host, but no others, fail....I need to route traffic to specific hosts out a specific interface that will be given its address via DHCP so having static gateways is not an option. To make matters worse this needs to be robust, it will be several hundred miles away so change the gateway addrss every time a dhcp change occurs is not an option either.... Smile

Any ideas where i am going wrongbb?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Powered by phpBB © 2001, 2005 phpBB Group