www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

[DHCP] only for RADIUS users

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
dani



Joined: 25 Mar 2015
Posts: 1

PostPosted: Wed Mar 25, 2015 12:31 pm    Post subject: [DHCP] only for RADIUS users Reply with quote

Hi!
Firstly, thanks a lot for your great work. Zeroshell is great!

This is my environment:

Zeroshell:

-ETH0 10.0.11.8 with DHCP enabled (pool 10.0.11.201-10.0.11.211).

-ETH1 10.1.0.8 ONLY for management (no DHCP).

-STATIC ROUTE 0.0.0.0/0 10.0.11.254 (to reach internet).

-RADIUS client 10.0.11.254.

-Captive portal disabled (but tested with cp enabled)

AP:

-LAN 10.0.11.254

-SSID test (WPA2 enterprise) radius server 10.0.11.8

-SSID test2 (WPA2 psk)

DHCP server:

-When I connect to SSID test (RADIUS user) zeroshell assigns IP from the DHCP pool 10.0.11.201-10.0.11.211.
When I connect to SSID test2 zeroshell assigns IP from DHCP the pool 10.0.11.201-10.0.11.211 too.


My goal is to assign the DHCP pool only to radius users.
I can't find the way to assign this DHCP pool only to authenticated RADIUS users and deny access to DHCP server to non RADIUS users.
It's possible to do that without using VLANs? Unfortunately I cannot use VLANs in this environment.

Best regards![/b]
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group