www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

List of all active connections

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
Montikore



Joined: 19 Jan 2016
Posts: 15

PostPosted: Tue Jan 19, 2016 9:44 am    Post subject: List of all active connections Reply with quote

Hi all,
After having searching for a way to get the list of all active connections going through zeroshell, i'm a bit surprised not to find anything...
I would need to have the list of IPs and ports for all active TCP connections (and eventually UDP streams), especially to monitor the use of virtual servers. Do i need another tool?

Thank you!
Back to top
View user's profile Send private message
Montikore



Joined: 19 Jan 2016
Posts: 15

PostPosted: Sat Jan 23, 2016 10:55 am    Post subject: Reply with quote

nobody does that to monitor incoming/outgoing connections??
Back to top
View user's profile Send private message
redfive



Joined: 27 Aug 2009
Posts: 232

PostPosted: Mon Jan 25, 2016 5:30 pm    Post subject: Reply with quote

Tried with CNTop button, on the Setup page, or even in firewall, connection tracking ?
Regards
Back to top
View user's profile Send private message
Montikore



Joined: 19 Jan 2016
Posts: 15

PostPosted: Wed Jan 27, 2016 1:22 pm    Post subject: Reply with quote

Thanks for your tips, but CNTop button shows only connexions sending/receiving enough data, is refreshed every seconds so it's not possible to monitor active connexions, and, for example, a classical SSH connexion will never appear here.
Regarding the firewall logs, indeed the information can be retrieved... but you will need another tool to analyse the logs... it is clearly impossible to monitor active connexions reading the logs.
Back to top
View user's profile Send private message
itanveer



Joined: 09 Feb 2017
Posts: 3

PostPosted: Fri Feb 17, 2017 7:39 am    Post subject: How to check connected users Reply with quote

Hello,

I am not sure if you already found the solution, but here i want to share how i am doing.

1. In the Captive Portal, you can see the connected clients.

or

2. Open the Log viewer and select Radiusd category, in the filter type Login..... it will show you all the login related entries....as soon as any new user is authenticated on the system, in the log it will appear.

Hope this helps

Ilyas
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group