www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Install USB Ethernet Drirvers

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
achillf



Joined: 25 Apr 2017
Posts: 2

PostPosted: Tue Apr 25, 2017 7:56 pm    Post subject: Install USB Ethernet Drirvers Reply with quote

hello i have this usb adapter and zeroshell dont recognize.
How can i install drivers in zeroshell?
I type in Scripts/Cron command
Quote:
lspci -v

and the result is:
Quote:

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [5109]

00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e0400000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 10c0 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at e0480000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at [disabled]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2

00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at e04c0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]

00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-0000000040300000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2

00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e0500000-e07fffff
Prefetchable memory behind bridge: 0000000040400000-0000000040500000
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2

00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 20
I/O ports at 1000 [size=32]

00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 1020 [size=32]

00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 1040 [size=32]

00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at 1060 [size=32]

00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 20
Memory at e04c4000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Capabilities: [50] #0d [0000]

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] #09 [100c]

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at 10a0 [size=16]

00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
I/O ports at 10d8 [size=8]
I/O ports at 10f0 [size=4]
I/O ports at 10e0 [size=8]
I/O ports at 10f4 [size=4]
I/O ports at 10b0 [size=16]
Capabilities: [70] Power Management version 2

3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express (rev 01)
Subsystem: Hewlett-Packard Company: Unknown device 3012
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at e0500000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable+
Capabilities: [d0] #10 [0001]


Back to top
View user's profile Send private message
DrmCa



Joined: 12 Apr 2011
Posts: 234

PostPosted: Thu Apr 27, 2017 4:21 pm    Post subject: Reply with quote

This will not be the answer you are looking for, but do not use a USB net adapter. Performance is going to suffer. Been there done that.
Back to top
View user's profile Send private message
reaperz



Joined: 13 Apr 2012
Posts: 100

PostPosted: Tue May 09, 2017 9:03 am    Post subject: Reply with quote

Hello

Right answer is to do some research before buying. I have serveral USB network adapters working for years with Zeroshell. More discussed in this thread:

http://www.zeroshell.org/forum/viewtopic.php?t=4161&highlight=usb

Both HG20F9 (cheap chinese white USB NIC) and Belkin F5D5055 work fine, for 2 years now. I would recommend Belkin F5D5055, it is solid!



PS. You have to restart the Zeroshell machine after connecting the USB NIC. Only then will the new interfaces appear. Just in case you did not try it already.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group