www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

bug - Orange Pi Zero & Orange Pi R1 latest not started

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Signal a BUG
View previous topic :: View next topic  
Author Message
dur



Joined: 23 Dec 2017
Posts: 1

PostPosted: Sat Dec 23, 2017 5:29 pm    Post subject: bug - Orange Pi Zero & Orange Pi R1 latest not started Reply with quote

ZeroShell-3.8.1A-OPIR1.img
ZeroShell-3.8.1A-OPIZERO.img
ZeroShell-3.7.1A-OPIZERO.img

iso copied on sd card on Debian w dd...


Orange Pi R1 log ZeroShell-3.8.1A-OPIR1
eth0: ethernet@1c30000 ONLY ONE ? device have two lan Shocked
Mounting ISO image... ? Shocked

Code:

U-Boot SPL 2017.01 (Feb 27 2017 - 20:21:04)
DRAM: 256 MiB
Trying to boot from MMC1

U-Boot 2017.01 (Feb 27 2017 - 20:21:04 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Zero
DRAM:  256 MiB
MMC:   SUNXI SD/MMC: 0
Setting up a 720x576i composite-pal console (overscan 32x20)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot-slot.scr
reading /boot-slot.scr
374 bytes read in 15 ms (23.4 KiB/s)
## Executing script at 43100000
reading slot.scr
208 bytes read in 31 ms (5.9 KiB/s)
## Executing script at 00000500
reading OPIZERO.bin
35384 bytes read in 31 ms (1.1 MiB/s)
reading 1/3.4.113-ARM-ZS/vmlinuz-OPIZERO
9963640 bytes read in 920 ms (10.3 MiB/s)
Using machid 0x1029 from environment

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   256MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00042!
ion_reserve_common: ion reserve: [0x47e00000, 0x50000000]!
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] cma: dma_declare_contiguous(266): ION reserve size should be 4m align! adjust size to 128MBytes
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64960
[    0.062574] CPU1: Booted secondary processor
[    0.062735] CPU2: Booted secondary processor
[    0.070967] CPU3: Booted secondary processor
[    0.090305] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[    0.090328] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
[    0.090352] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[    0.090376] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[    0.090398] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8
[    0.090421] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[    0.104085] plat: add bmp085 device
[    0.104110] plat: add pcf8591 device
[    0.104991] sunxi_default_clk_init
[    0.105006] try to set pll6ahb1 to 200000000
[    0.105045] try to set ahb clk source to pll6ahb1
[    0.105063] set ahb clk source to pll6ahb1
[    0.105083] try to set ahb1 to 200000000
[    0.105105] try to set apb1 to 100000000
[    0.452013] misc fatfs initialized
[    0.667135] sunxi_cmatest_init enter
[    0.671364] sunxi_cmatest_init success
[    1.188203]  uinput result 0 , vmouse_init
[    1.194654] sunxikbd_init failed.
[    1.198506] ls_fetch_sysconfig_para: ls_unused.
[    1.203822] ltr_init: ls_fetch_sysconfig_para err.
[    1.209821] [RTC] WARNING: Rtc time will be wrong!!
[    1.215358] [RTC] WARNING: use *internal OSC* as clock source
[    1.223285] sunxi cedar version 0.1
[    1.227381] [cedar]: install start!!!
[    1.231917] [cedar]: install end!!!
[    1.242016] calibrat: max_cpufreq 1008Mhz Type 1!
[    1.247315] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[    1.257286] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Mar 15 2017 at 00:00:58
[    1.268909] [mmc]: get mmc0's sdc_power is null!
[    1.274167] [mmc]: get mmc1's sdc_power is null!
[    1.279361] [mmc]: get mmc1's 2xmode ok, val = 1
[    1.284580] [mmc]: get mmc1's ddrmode ok, val = 1
[    1.289885] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2
[    1.301715] [mmc]: sdc0 power_supply is null
[    1.304511] no blue_led, ignore it!
[    1.305243] no led_0, ignore it!
[    1.305256] no led_1, ignore it!
[    1.305268] no led_2, ignore it!
[    1.305281] no led_3, ignore it!
[    1.305293] no led_4, ignore it!
[    1.305305] no led_5, ignore it!
[    1.305318] no led_6, ignore it!
[    1.305330] no led_7, ignore it!
[    1.346739] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly!
[    1.357626] [I2S]snddaudio cannot find any using configuration for controllers, return directly!
[    1.386138] tv registered!!
[    1.390575] ths_fet---------------------------------
 Zeroshell 3.8.1A        (SLOT 1)
---------------------------------
 Kernel: 3.4.113-ARM-ZS

Mounting ISO image  ...
Failed to mount the Live CD



Orange Pi Zero 256M log ZeroShell-3.8.1A-OPIZERO

Code:

U-Boot SPL 2017.01 (Feb 27 2017 - 20:21:04)
DRAM: 256 MiB
Trying to boot from MMC1

U-Boot 2017.01 (Feb 27 2017 - 20:21:04 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Zero
DRAM:  256 MiB
MMC:   SUNXI SD/MMC: 0
Setting up a 720x576i composite-pal console (overscan 32x20)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot-slot.scr
reading /boot-slot.scr
374 bytes read in 14 ms (25.4 KiB/s)
## Executing script at 43100000
reading slot.scr
208 bytes read in 31 ms (5.9 KiB/s)
## Executing script at 00000500
reading OPIZERO.bin
35384 bytes read in 30 ms (1.1 MiB/s)
reading 1/3.4.113-ARM-ZS/vmlinuz-OPIZERO
Invalid FAT entry
** Unable to read file 1/3.4.113-ARM-ZS/vmlinuz-OPIZERO **
SCRIPT FAILED: continuing...
MMC Device 1 not found
no mmc device at slot 1
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found

USB device 0: unknown device
BOOTP broadcast 1
<... cuteed many ...>
BOOTP broadcast 17

Retry time exceeded; starting again
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-02-20-d8-43-d2-93
_sun8i_emac_eth_init: Timeout
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
*** ERROR: `serverip' not set
<... cuteed many ...>
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
*** ERROR: `serverip' not set
Config file not found
BOOTP broadcast 1...




Orange Pi Zero 256M log ZeroShell-3.7.1A

Code:

U-Boot SPL 2017.01 (Feb 27 2017 - 20:21:04)
DRAM: 256 MiB
Trying to boot from MMC1

U-Boot 2017.01 (Feb 27 2017 - 20:21:04 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Zero
DRAM:  256 MiB
MMC:   SUNXI SD/MMC: 0
Setting up a 720x576i composite-pal console (overscan 32x20)
In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot-slot.scr
reading /boot-slot.scr
374 bytes read in 14 ms (25.4 KiB/s)
## Executing script at 43100000
reading slot.scr
208 bytes read in 31 ms (5.9 KiB/s)
## Executing script at 00000500
reading OPIZERO.bin
35384 bytes read in 30 ms (1.1 MiB/s)
reading 1/3.4.113-ARM-ZS/vmlinuz-OPIZERO
Invalid FAT entry
** Unable to read file 1/3.4.113-ARM-ZS/vmlinuz-OPIZERO **
SCRIPT FAILED: continuing...
MMC Device 1 not found
no mmc device at slot 1
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found

USB device 0: unknown device
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
<cut>
Retry time exceeded; starting again
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-02-20-d8-43-d2-93
_sun8i_emac_eth_init: Timeout
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
*** ERROR: `serverip' not set
<cut>
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
*** ERROR: `serverip' not set
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
*** ERROR: `serverip' not set
Config file not found
BOOTP broadcast 1
...
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Signal a BUG All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group