www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Captive portal Bandwidth limit per user

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> RADIUS 802.1x and Captive Portal
View previous topic :: View next topic  
Author Message
crash



Joined: 03 Mar 2015
Posts: 1

PostPosted: Wed Mar 04, 2015 11:56 am    Post subject: Captive portal Bandwidth limit per user Reply with quote

Hi all,

I just need to know if I make something wrong or if it's normal?

I try configuring captive portal with bandwidth limit per user but if I male a test with www.speedtest.net, it say that I'm not limited...?

I've followed this: http://www.zeroshell.org/radius-accounting/

It say that's not implemented in version 1.06 is it for the actual version?

Thanx all
Back to top
View user's profile Send private message
titopuentes



Joined: 04 Aug 2015
Posts: 4

PostPosted: Fri Nov 25, 2016 1:55 pm    Post subject: Re: Captive portal Bandwidth limit per user Reply with quote

crash wrote:
Hi all,

I just need to know if I make something wrong or if it's normal?

I try configuring captive portal with bandwidth limit per user but if I male a test with www.speedtest.net, it say that I'm not limited...?

I've followed this: http://www.zeroshell.org/radius-accounting/

It say that's not implemented in version 1.06 is it for the actual version?

Thanx all


Same problem with last version. Someone can fix that?
Back to top
View user's profile Send private message
afroIT



Joined: 23 Oct 2015
Posts: 15

PostPosted: Sat Feb 03, 2018 10:57 pm    Post subject: Reply with quote

I believe this is not implemented, as stated on the manual.
Probably a forgotten part of this project.
Would be nice to have it done. Would allow me to use the integrated captive portal of ZS. Mobile devices nowadays hunt so much for bandwidth that this is a very important feature to enable.

http://www.zeroshell.org/radius-accounting/
Quote:

Connection Limits
For each class of accounting is possible to define an upper limit in Megabytes for the traffic generated and the maximum number of hours or fractions of hours for which the user can remain connected. When the user exceeds at least one of the two limits is automatically disconnected and no longer allowed to connect until the counters are not reset. Note that the bandwidth limit in Megabytes per second has not yet been implemented in the current version of Zeroshell (1.0.beta16).


I just tried with with v3.8.2 and it is not limiting.

Kudos to Fulvio for putting this project together by the way, I keep coming back to ZS after trying other solutions.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> RADIUS 802.1x and Captive Portal All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group