www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

How to setup ethernet VPN bridge

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> VPN
View previous topic :: View next topic  
Author Message
Zibber



Joined: 11 Feb 2018
Posts: 2

PostPosted: Sun Feb 11, 2018 5:55 pm    Post subject: How to setup ethernet VPN bridge Reply with quote

I am new to zeroshell. I am looking for a solution to deploy a small zeroshell box (OPI R1) with dual ethernetports on the broadband internetmodem of elderly people enabling them to have remote distance videocare over secure (VPN) connections.

The OPI R1 zeroshell is fully up and running allowing for both ethernet and wifi access to the eth0/NAT port. So wired and wireless IP devices and tablets can be deployed over the NAT'ted internet connection.

I am loking for instructions from this forum on how to setup the oVPN connection to the likes of VyprVPN/PIA. I am used deploying .ovpn certificates and need some guidance how to tunnel all internet traffic over the VPN connection - I could not make much out of the current documentation and faq's.

Pls advise
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> VPN All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group