www.zeroshell.org

[alank2]

Hi,

I received a couple keys from Fulvio today (thanks!) and I entered them ok. I rebooted the zeroshell and still don't see any graphics for ETH00 or ETH01.

I then checked the mrtg service and noticed this:

root@zeroshell root> service mrtg status
MRTG is not running
root@zeroshell root> service mrtg start
Starting MRTG ...
Daemonizing MRTG ... [ OK ]
root@zeroshell root> service mrtg status
MRTG is not running
root@zeroshell root>

It won't stay running. Is this normal? Any idea why I'm not getting graphics for the ETH00/ETH01 ?

Thanks,

Alan

[alank2]

Hi,

Seems to be a bug in the global bandwidth settings. If you set them to kbit/s instead of mbit/s and use a value over 1000, then the mrtg service will only run for 10 seconds and quit. I've sent some diagnostics to Fulvio and he says he thinks he has it figured out and will fix soon. In the meantime, just use mbit/s and set it with a decimal like 1.344 as a solution.

Good luck,

Alan