www.zeroshell.org

[Ddall]

Hi,

In Zeroshell Beta13, you CAN'T authenticate a user using Radius
To be more accurate, you can't create a user that can be authenticated by Radius.
Wich means: No VPN and no WPA 802.x.

Try to add or update an user, check the "RADIUS" box and Submit. Go back, to edit the same user: The RADIUS box is now unchecked.



Tested this on 3 different platforms, (an old HP desktop, an MSI wind netbook, and a VMWare machine) using the iso and compactflash images with the same result.

(This is a repost of this thread: this thread (wrong section))

[Ddall]

Come on!

It's been more than 10days and no-one cares to say if I'm right or wrong here?

It's easy: "I use ZS beta 13 and this bug affects me / doesn't affect me"

[redfive]

same problem with radius and new users , while for old users previously created at beta 13 update is still possible change vlan and obtain radius authentication
bye
jonatha

[AtroposX]

I had the same problem right after getting radius enabled and captive portal set up. I created a new user, ticked Radius, and clicked submit, tried to log into the portal as the user, and it wouldn't work. I fixed it by going back into the user's account, saw that it was not ticked, like yours, I ticked it anyways, clicked submit, and radius worked, and was able to log into the portal, and WPA worked for wireless.

[Ddall]

AtroposX's solution works only for Captative Portal with me.

But using WPA, I get this:

[0hanzee]

Ddall tiene razón.

RADIUS Authentication Protocol está siempre desactivado en la configuración del usuario, no se puede conectar a la Wifi mediante PEAP, salvo que se utilice el usuario admin, tal y como dice AtroposX.

Sin embargo, EAP-TLS funciona. He instalado los certificados de los usuarios en sus respectivos portátiles y se conectan a la Wifi sin problemas.

¿Habeis probado a modificar directamente el archivo /etc/raddb/users?

[Ddall]

[Ddall]

I Emailed Fulvio about it:

[PeiJ]

[fulvio]

The beta14 corrects this issue.

Regards
Fulvio