jncneo
Joined: 01 Apr 2009
Posts: 2
|
 Posted: Wed May 20, 2009 2:55 pm Post subject: Problems with VPN |
 |
|
Hi, all!
I've started to use Zeroshell about a month ago. Now I have a problem when I'm trying to make failover between two channels using openvpn like it posted here: http://zeroshell.net/eng/load-balancing-failover/
I have two WANs in one office and one WAN in another.
In first office I've added to Net Balancer two gateways and it works fine. Then I've made two VPNs on each side and added them to BOND.
Let's say my IPs in one office are 111.111.111.111 and 222.222.222.222 and in another IP is xxx.xxx.xxx.xxx.
Both of VPNs in second office says that they are connected to 111.111.111.111, but I've configured them to work with 111.111.111.111:1195 (VPN00) and 222.222.222.222:1196 (VPN01). And on the other side I've also configured different gateways for both VPNs.
Then I've disconnected channel with 222.222.222.222 from Zeroshell and VPN01 was marked as ""DOWN"" and VPN00 was marked as ""UP"". Then I've connected 222.222.222.222 and disconnected 111.111.111.111 and then both VPNs are marked as ""DOWN""
Can anyone help me? |
|
Search
Register
Usergroups
Profile
Log in
Private Message
