www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

wifi usb not detected

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
mrcola



Joined: 21 Jul 2009
Posts: 1

PostPosted: Tue Jul 21, 2009 4:32 pm    Post subject: wifi usb not detected Reply with quote

Hi, I have a wifi usb dongle (Atheros chipset, D-Link DWL-G132), it doesn't appear in the WIFI section.

Could anybody help

Cheers

RW
Back to top
View user's profile Send private message
reaperz



Joined: 13 Apr 2012
Posts: 93

PostPosted: Fri Sep 09, 2016 5:36 pm    Post subject: Reply with quote

Hello

I have just bought Asus USB-N13 USB-wifi. I did buy it specifically since it is supposed wto work in Linux! If I plug it in, I get in log:

[545243.645044] usb 5-4: new high-speed USB device number 2 using ehci-pci
[545243.778798] usb 5-4: New USB device found, idVendor=0b05, idProduct=17ab
[545243.778806] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[545243.778812] usb 5-4: Product: 802.11n WLAN Adapter
[545243.778816] usb 5-4: Manufacturer: Realtek
[545243.778821] usb 5-4: SerialNumber: 00e04c000001
[545243.797814] cfg80211: World regulatory domain updated:
[545243.797822] cfg80211: DFS Master region: unset
[545243.797825] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[545243.797831] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[545243.797836] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[545243.797840] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[545243.797845] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[545243.797850] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[545243.797855] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[545243.797859] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[545243.797864] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[545243.828650] rtl8192cu: Chip version 0x11
[545243.916043] rtl8192cu: MAC address: 34:97:f6:63:8f:cb
[545243.916053] rtl8192cu: Board Type 0
[545243.916281] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[545243.916864] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[545243.922651] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[545243.925800] usbcore: registered new interface driver rtl8192cu
[545243.928447] usbcore: registered new interface driver rtl8xxxu

But I don't see anything in Zeroshell web interface. I restarted my Zeroshell router, still no change!

Is there any simple way to get this USB-WIFI working? Or what would be readily available USB WIFI dongle, that works with Zeroshell?

I don't want to use it as a repeater, I want to connect to my 4G WIFI pocket router Huawei e5577, as a backup connection. Can't use 4G USB dongle, Zeroshell does not support it!
Back to top
View user's profile Send private message
iulyb



Joined: 02 Jun 2016
Posts: 89

PostPosted: Fri Sep 09, 2016 9:21 pm    Post subject: Reply with quote

You need to setup your wifi from command line.
There is no wifi web interface yet.
Back to top
View user's profile Send private message
reaperz



Joined: 13 Apr 2012
Posts: 93

PostPosted: Tue Jun 27, 2017 11:42 am    Post subject: Reply with quote

I have now tested several USB WIFI cards. Only one of them worked under zeroshell and there only partially. Worked only as open system, no possible with WPA2.

Other cards were not detected at all.

Please if there is any USB WIFI card, that is sure to work under Zeroshell, let me know!

[888789.439188] usb 5-6: new high-speed USB device number 2 using ehci-pci
[888789.572346] usb 5-6: New USB device found, idVendor=0bda, idProduct=818b
[888789.572354] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[888789.572359] usb 5-6: Product: 802.11n NIC
[888789.572364] usb 5-6: Manufacturer: Realtek
[888789.572368] usb 5-6: SerialNumber: 00e04c000001



WLAN00 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

wlan0 IEEE 802.11bgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off


WLAN00 AP:NOT ASSOCIATED Freq: Rate: Quality:
WiFi - [SSID:seljakott] [Mode:sta] [Security:wpa-psk]


[wlan0] Unknown Model
/root/kerbynet.cgi/scripts/wifi.inc: line 190: /sys/class/net/wlan0/phy80211/addresses: No such file or directory


Starting WiFi subsystem ...
--> No supported Wi-Fi hardware has been found.





<N> New SSID <M> Modify SSID
<D> Delete SSID <I> Show Information
<C> Reg-Domain/Std/Channel/Tx-Power
<L> List Stations <S> Channel Scanning
<R> Restarting Devices <Q> Quit

>> n

wlan0 - Unknown Model

WiFi device on which you want to add a new SSID [wlan0]:
/root/kerbynet.cgi/scripts/wifi.inc: line 190: /sys/class/net/wlan0/phy80211/addresses: No such file or directory

ERROR: it is not possible to create another SSID on wlan0:
- The max number of virtual AP is 4.
- Only one SSID can be set in Station mode and must be
created after the creation of the virtual APs.

Please wait: the WiFi subsystem needs to be restarted ...

REGULATORY DOMAIN: 00 (WORLD)

[wlan0] Unknown Model
/root/kerbynet.cgi/scripts/wifi.inc: line 190: /sys/class/net/wlan0/phy80211/addresses: No such file or directory

[1243761.041947] usb 5-6: new high-speed USB device number 3 using ehci-pci
[1243761.183114] usb 5-6: New USB device found, idVendor=0bda, idProduct=8179
[1243761.183124] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1243761.196447] cfg80211: World regulatory domain updated:
[1243761.196456] cfg80211: DFS Master region: unset
[1243761.196460] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[1243761.196466] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[1243761.196470] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[1243761.196475] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[1243761.196480] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[1243761.196485] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[1243761.196490] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[1243761.196495] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[1243761.196499] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[1243761.200479] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[1243761.205849] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[1243761.239126] usbcore: registered new interface driver r8188eu
[1243905.631782] MAC Address = 18:d6:c7:12:83:4c
[1243905.635927] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1243912.719495] R8188EU: ERROR indicate disassoc


[668214.174031] usb 5-6: new high-speed USB device number 2 using ehci-pci
[668214.323167] usb 5-6: New USB device found, idVendor=0bda, idProduct=818b
[668214.323173] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[668214.323176] usb 5-6: Product: 802.11n NIC
[668214.323179] usb 5-6: Manufacturer: Realtek
[668214.323181] usb 5-6: SerialNumber: 00e04c000001
[668214.350895] usb 5-6: This Realtek USB WiFi dongle (0x0bda:0x818b) is untested!
[668214.350901] usb 5-6: Please report results to Jes.Sorensen@gmail.com
[668214.514659] usb 5-6: Vendor: Realtek
[668214.514664] usb 5-6: Product: 802.11n NIC
[668214.514666] usb 5-6: Serial: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff
[668214.514670] usb 5-6: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
[668214.514673] usb 5-6: 00: 29 81 00 7c 01 40 03 00
[668214.514676] usb 5-6: 08: 40 74 04 50 14 00 00 00
[668214.514679] usb 5-6: 10: 2b 2b 2b 2b 2b 2b 25 25
[668214.514682] usb 5-6: 18: 25 25 25 57 ef ef ff ff
[668214.514684] usb 5-6: 20: ff ff ff ff ff ff ff ff
[668214.514687] usb 5-6: 28: ff ff ff ff ff ff ff ff
[668214.514690] usb 5-6: 30: ff ff ff ff ff ff ff ff
[668214.514693] usb 5-6: 38: ff ff 2e 2e 2e 2e 2e 2e
[668214.514695] usb 5-6: 40: 2a 2a 2a 2a 2a 07 ef ef
[668214.514698] usb 5-6: 48: ff ff ff ff ff ff ff ff
[668214.514701] usb 5-6: 50: ff ff ff ff ff ff ff ff
[668214.514703] usb 5-6: 58: ff ff ff ff ff ff ff ff
[668214.514706] usb 5-6: 60: ff ff ff ff ff ff ff ff
[668214.514709] usb 5-6: 68: ff ff ff ff ff ff ff ff
[668214.514712] usb 5-6: 70: ff ff ff ff ff ff ff ff
[668214.514714] usb 5-6: 78: ff ff ff ff ff ff ff ff
[668214.514717] usb 5-6: 80: ff ff ff ff ff ff ff ff
[668214.514720] usb 5-6: 88: ff ff ff ff ff ff ff ff
[668214.514722] usb 5-6: 90: ff ff ff ff ff ff ff ff
[668214.514725] usb 5-6: 98: ff ff ff ff ff ff ff ff
[668214.514728] usb 5-6: a0: ff ff ff ff ff ff ff ff
[668214.514730] usb 5-6: a8: ff ff ff ff ff ff ff ff
[668214.514733] usb 5-6: b0: ff ff ff ff ff ff ff ff
[668214.514736] usb 5-6: b8: 20 01 24 00 00 00 ff ff
[668214.514739] usb 5-6: c0: ff 01 20 13 00 00 00 ff
[668214.514741] usb 5-6: c8: 00 00 ff ff ff ff ff ff
[668214.514744] usb 5-6: d0: da 0b 8b 81 e7 47 02 00
[668214.514747] usb 5-6: d8: 13 ef 46 09 92 09 03 52
[668214.514750] usb 5-6: e0: 65 61 6c 74 65 6b 0d 03
[668214.514752] usb 5-6: e8: 38 30 32 2e 31 31 6e 20
[668214.514755] usb 5-6: f0: 4e 49 43 00 ff ff ff ff
[668214.514758] usb 5-6: f8: ff ff ff ff ff ff ff ff
[668214.514760] usb 5-6: 100: ff ff ff ff ff ff ff ff
[668214.514763] usb 5-6: 108: ff ff ff ff ff ff ff ff
[668214.514766] usb 5-6: 110: ff ff ff ff ff ff ff 0d
[668214.514769] usb 5-6: 118: 03 00 05 00 30 00 00 00
[668214.514771] usb 5-6: 120: 00 93 ff ff ff ff ff ff
[668214.514774] usb 5-6: 128: ff ff ff ff ff ff ff ff
[668214.514777] usb 5-6: 130: f6 a8 98 2d 03 92 98 00
[668214.514779] usb 5-6: 138: fc 8c 00 11 9b 44 02 0a
[668214.514782] usb 5-6: 140: ff ff ff ff ff ff ff ff
[668214.514785] usb 5-6: 148: ff ff ff ff ff ff ff ff
[668214.514788] usb 5-6: 150: ff ff ff ff ff ff ff ff
[668214.514790] usb 5-6: 158: ff ff ff ff ff ff ff ff
[668214.514793] usb 5-6: 160: ff ff ff ff ff ff ff ff
[668214.514796] usb 5-6: 168: ff ff ff ff ff ff ff ff
[668214.514798] usb 5-6: 170: ff ff ff ff ff ff ff ff
[668214.514801] usb 5-6: 178: ff ff ff ff ff ff ff ff
[668214.514804] usb 5-6: 180: ff ff ff ff ff ff ff ff
[668214.514807] usb 5-6: 188: ff ff ff ff ff ff ff ff
[668214.514809] usb 5-6: 190: ff ff ff ff ff ff ff ff
[668214.514812] usb 5-6: 198: ff ff ff ff ff ff ff ff
[668214.514815] usb 5-6: 1a0: ff ff ff ff ff ff ff ff
[668214.514818] usb 5-6: 1a8: ff ff ff ff ff ff ff ff
[668214.514820] usb 5-6: 1b0: ff ff ff ff ff ff ff ff
[668214.514823] usb 5-6: 1b8: ff ff ff ff ff ff ff ff
[668214.514826] usb 5-6: 1c0: ff ff ff ff ff ff ff ff
[668214.514828] usb 5-6: 1c8: ff ff ff ff ff ff ff ff
[668214.514831] usb 5-6: 1d0: ff ff ff ff ff ff ff ff
[668214.514834] usb 5-6: 1d8: ff ff ff ff ff ff ff ff
[668214.514837] usb 5-6: 1e0: ff ff ff ff ff ff ff ff
[668214.514839] usb 5-6: 1e8: ff ff ff ff ff ff ff ff
[668214.514842] usb 5-6: 1f0: ff ff ff ff ff ff ff ff
[668214.514845] usb 5-6: 1f8: ff ff ff ff ff ff ff ff
[668214.514850] usb 5-6: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
[668214.514853] usb 5-6: RTL8192EU MAC: 00:13:ef:46:09:92
[668214.514856] usb 5-6: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
[668214.517107] usb 5-6: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2
[668214.517113] usb 5-6: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed
[668214.517116] usb 5-6: Fatal - failed to load firmware
[668214.517141] rtl8xxxu: probe of 5-6:1.0 failed with error -11
[668214.517193] usbcore: registered new interface driver rtl8xxxu




[668305.336430] usb 5-6: new high-speed USB device number 4 using ehci-pci
[668305.485323] usb 5-6: New USB device found, idVendor=0bda, idProduct=8179
[668305.485329] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[668305.485331] usb 5-6: Product: 802.11n NIC
[668305.485334] usb 5-6: Manufacturer: Realtek
[668305.485337] usb 5-6: SerialNumber: 00E04C0001
[668305.489233] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
[668305.492091] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
[668305.526653] usbcore: registered new interface driver r8188eu


REGULATORY DOMAIN: 00 (WORLD)

[wlan0] Unknown Model
/root/kerbynet.cgi/scripts/wifi.inc: line 190: /sys/class/net/wlan0/phy80211/addresses: No such file or directory
-- If --- Mode -- SSID -------------------------- Hide -- WDS -- Security -

COMMANDS
<N> New SSID <M> Modify SSID
<D> Delete SSID <I> Show Information
<C> Reg-Domain/Std/Channel/Tx-Power
<L> List Stations <S> Channel Scanning
<R> Restarting Devices <Q> Quit
Back to top
View user's profile Send private message
iulyb



Joined: 02 Jun 2016
Posts: 89

PostPosted: Tue Jun 27, 2017 9:05 pm    Post subject: Reply with quote

Hi,
There are 2 things you might need to address.
- Kernel needs to see your wifi card
- host ap might need to be updated.

The other way woud be to get a suorted card in linux. If your card is supported under ubuntu then you have chances to make it work.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group