| View previous topic :: View next topic |
| Author |
Message |
vitesse
Joined: 19 Sep 2010
Posts: 13
Location: canada
|
 Posted: Mon Sep 27, 2010 9:02 pm Post subject: accessing dsl modem |
 |
|
I want to have access to my dsl modems that are physically connected to eth01 and eth02. they are both used to connected to Internet in mlppp mode from ppp0.
I need it to use dmt tool (telnet access) so I can get line stat. Was using a simple tomato/mlppp setup on a linksys wrt54gl before and it was easy.
Now I have no clue on zeroshell. I would like to use a local IP to access it on the lan.
Currently
192.168.1.10 -> ETH00 (lan switch)
would like
192.168.1.1 first st516 dsl modem
192.168.1.2 second st516 dsl modem
but I have no clue if it's possible to have both modem on the same subnet as my network.
Thanks for your help  |
|
| Back to top |
|
 |
ppalias
Joined: 17 Dec 2008
Posts: 1151
Location: Athens, Greece
|
| Posted: Tue Sep 28, 2010 6:47 am Post subject: |
|
|
| One solution I have come across is to assign your modems to different subnets and NAT on the interfaces that connect to them. |
|
| Back to top |
|
|
|
Search
Register
Usergroups
Profile
Log in
Private Message
