www.zeroshell.org

[RgGolbraich]

Hello,

I use ZS beta 16 and i have problem with Intel Gigabit CT desktop adapter.
When i run lspci i get this:

-------------------
root@zeroshell src> lspci

01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection

03:02.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05)
------------------

Intel CT is this one "82574L". I dont have a driver for him, i check Intel site and found that i need e1000e driver for it.
But when i checked the: /lib/modules/<KERNEL VERSION>/kernel/drivers/net/e1000e/e1000e.[k]o

i found him on the system, also when i try to load the driver i get this msg:

root@zeroshell e1000e> insmod /lib/modules/2.6.25.20/kernel/drivers/net/e1000e/e1000e.ko
insmod: error inserting '/lib/modules/2.6.25.20/kernel/drivers/net/e1000e/e1000e.ko': -1 File exists

also i tried to Compile the original Intel e1000e driver and i get this msg:

root@zeroshell src> make install
Makefile:71: *** Kernel header files not in any of the expected locations.
Makefile:72: *** Install the appropriate kernel development package, e.g.
Makefile:73: *** kernel-devel, for building kernel modules and try again. Stop.


The second Intel card is working fine but this one is making me a hard time.
Can someone please help me make it work? cause im frustrated.

Thanks.