www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

PPPoE over VLAN with Draytek 120?

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Networking
View previous topic :: View next topic  
Author Message
DWJames



Joined: 20 Oct 2011
Posts: 7

PostPosted: Thu Oct 20, 2011 1:02 pm    Post subject: PPPoE over VLAN with Draytek 120? Reply with quote

Hi,
is it possible to configure a PPPoE connection so that the modem device does not have to be directly connected to an ETH port on my Zeroshell box?

I have 4 Draytek Vigor 120+ PPPoE Modems and I thought I can connect these using a dedicated VLAN for each, but although the Zeroshell can ping the modem, it can't connect with PPPoE over this VLAN interface.

I get this message in the log:
11:15:45 pppd 2.4.3 started by root, uid 0
11:15:45 Using interface ppp3
11:15:45 Connect: ppp3 <--> /dev/pts/0
11:16:16 LCP: timeout sending Config-Requests
11:16:16 Connection terminated.
11:16:16 Using interface ppp3
11:16:16 Connect: ppp3 <--> /dev/pts/1
11:16:21 tcflush failed: Bad file descriptor
11:16:21 Exit.

Is there something I'm missing to make this work via a VLAN or do I have to buy some USB Ethernet devices so that the modems are on a physical interface?
thanks,
James Smile
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Networking All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group