www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

zs-dev beta 16
Goto page 1, 2  Next
 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Fri Oct 28, 2011 9:44 am    Post subject: zs-dev beta 16 Reply with quote

Ciao

new beta 16 dev

http://www.renatomorano.net/?p=1279

have fun

as always:
free as in free speech, not as in free beer. RMS
Stand up for your freedom to install free software

http://www.fsf.org/campaigns/secure-boot-vs-restricted-boot/statement
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Sat Dec 31, 2011 7:38 am    Post subject: Re: zs-dev beta 16 Reply with quote

renato.morano wrote:
Ciao

new beta 16 dev

http://www.renatomorano.net/?p=1279

have fun

as always:
��free� as in free speech, not as in �free� beer.� RMS
Stand up for your freedom to install free software

http://www.fsf.org/campaigns/secure-boot-vs-restricted-boot/statement



upload terminato Wink
http://www.renatomorano.net/?p=1279
upload terminato Wink


update kenel to 3.1.6 , udev 125, boot new ATA driver
BOND ETHXX only without GUI
Embarassed
Back to top
View user's profile Send private message
FlappySocks



Joined: 21 Jan 2012
Posts: 2

PostPosted: Sat Jan 21, 2012 1:44 pm    Post subject: Reply with quote

Is this the latest version? I'm having some problems with my RTL8111EVL network adapters with the September build.

megaupload.com is down (possibly for good).
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Tue Jan 24, 2012 8:30 am    Post subject: Reply with quote

Ciao,
this is like a professional service so I can remastering zs b16 win kernel 2.6.39.4 with RTL8111EVL but as always I need money 50 not for the source code but for the time to recompile.

see you soon
Renato
ps.
please don't be shine but Nguyen never pay me Embarassed so first money then service Wink
http://www.renatomorano.net/?p=1309
Back to top
View user's profile Send private message
hojendiz



Joined: 28 Jul 2011
Posts: 11

PostPosted: Wed Jan 25, 2012 4:49 pm    Post subject: Reply with quote

Fulvio Ricciardi knows that you are charging?
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Thu Jan 26, 2012 7:51 am    Post subject: Reply with quote

Yes,

but as always:

"'free' as in free speech, not as in 'free' beer." RMS
http://stallman.org/
http://www.fsf.org/


new kernel version
http://www.renatomorano.net/?p=1279
Back to top
View user's profile Send private message
FlashEngineer



Joined: 23 Jan 2012
Posts: 22

PostPosted: Mon Jan 30, 2012 7:10 am    Post subject: Reply with quote

Hi can you read my post, I'm having issue with mounting my sdd or something with the file system, Im' not sure what is going on
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Jan 30, 2012 3:10 pm    Post subject: Reply with quote

Hi,

so startup is ok but you can't create a new profile ? let me know hardware please
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Jan 30, 2012 5:56 pm    Post subject: Reply with quote

kernel 3.2.2 in upload
Wink
Back to top
View user's profile Send private message
FlashEngineer



Joined: 23 Jan 2012
Posts: 22

PostPosted: Tue Jan 31, 2012 5:08 am    Post subject: Reply with quote

I think there was some issue with the partition label being GPT or MSDOS

I'm not sure what the original problem was but now it seems I can format and create partitions on the web interface after I changed the partition label back to MSDOS..

So I'm not sure why before there was an issue...

Can you explain which partition can zeroshell deal with? GPT or MSDOS?
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Wed Feb 22, 2012 9:27 am    Post subject: Reply with quote

Hi,

added xen support DomU


http://dl.dropbox.com/u/59053096/zs_322_zen.img.bz2
Back to top
View user's profile Send private message
tls



Joined: 09 Jul 2011
Posts: 17

PostPosted: Thu Feb 23, 2012 9:41 pm    Post subject: Reply with quote

Are there any tricks, comments or config files that need to be loaded to make this work. What version of Xen (3 or 4) did you compile to and what arch 64bit or 32bit?

I am just about to install your image into my new Xen server (4.12/64bit) and would love to know; I will let you know if it works. I hope your fixes get pushed into the main line, can you comment on that also please.

Regards,
ty



renato.morano wrote:
Hi,

added xen support DomU


http://dl.dropbox.com/u/59053096/zs_322_zen.img.bz2
Back to top
View user's profile Send private message
nickphx



Joined: 15 Feb 2012
Posts: 9

PostPosted: Fri Feb 24, 2012 12:11 am    Post subject: Reply with quote

renato.morano wrote:
Hi,

added xen support DomU


http://dl.dropbox.com/u/59053096/zs_322_zen.img.bz2


Are you available to do custom work on zeroshell? I'm willing to pre-pay for your time.. I had made a post on here about patching the bonding driver to support weighted round-robin.. Would you be interested in doing this work?
thanks,
nick
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Fri Feb 24, 2012 8:15 am    Post subject: Reply with quote

Hi,

let me know if it works because i don't have Dom0 environment. Embarassed
Standard compilation with same gcc tool, there are same changes into initrd I hope it can boot in Dom0. It is a 32bit with pae support, at last is all into code.

tls wrote:
Are there any tricks, comments or config files that need to be loaded to make this work. What version of Xen (3 or 4) did you compile to and what arch 64bit or 32bit?

I am just about to install your image into my new Xen server (4.12/64bit) and would love to know; I will let you know if it works. I hope your fixes get pushed into the main line, can you comment on that also please.

Regards,
ty



renato.morano wrote:
Hi,

added xen support DomU


http://dl.dropbox.com/u/59053096/zs_322_zen.img.bz2
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Fri Feb 24, 2012 8:18 am    Post subject: Reply with quote

Hi,

are you sure that the solution is patch the kernel and not to change how to define bond ?

http://pastie.org/3388968 is not a complete patch. I have to compile to 2.6.25 ?
The question is this kernel match your hardware now and in the future ? You have to work in virtual environment then.

At last i can try in my spare time or you have a time line to end ?




nickphx wrote:
renato.morano wrote:
Hi,

added xen support DomU


http://dl.dropbox.com/u/59053096/zs_322_zen.img.bz2


Are you available to do custom work on zeroshell? I'm willing to pre-pay for your time.. I had made a post on here about patching the bonding driver to support weighted round-robin.. Would you be interested in doing this work?
thanks,
nick
Back to top
View user's profile Send private message
nickphx



Joined: 15 Feb 2012
Posts: 9

PostPosted: Fri Feb 24, 2012 5:29 pm    Post subject: Reply with quote

renato.morano wrote:
Hi,

are you sure that the solution is patch the kernel and not to change how to define bond ?

http://pastie.org/3388968 is not a complete patch. I have to compile to 2.6.25 ?
The question is this kernel match your hardware now and in the future ? You have to work in virtual environment then.

At last i can try in my spare time or you have a time line to end ?



I am not sure if the patch will resolve the problem. From my understanding the patch will allow you to define a different bonding mode called weighted round robin.

This allows you to set a 'weight' for each interface that is bonded so one interface will receive more of the traffic than the other. I believe this will help when bonding connections with different bandwidth like a 50/5 cable modem and 20/1 vdsl2 line..

I do not have a time line as it would be for my personal use. Thank you for the development version of r16! Smile
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Fri Feb 24, 2012 6:41 pm    Post subject: Reply with quote

Hi,

please send me the patch Wink

I hope there are some changes to do to define new model of round robin into zeroshell GUI.
Back to top
View user's profile Send private message
nickphx



Joined: 15 Feb 2012
Posts: 9

PostPosted: Sun Feb 26, 2012 5:59 pm    Post subject: Reply with quote

renato.morano wrote:
Hi,

please send me the patch Wink

I hope there are some changes to do to define new model of round robin into zeroshell GUI.


http://anubis.mw.hu/bonding/bonding.h.diff
http://anubis.mw.hu/bonding/bond_main.c.diff
http://anubis.mw.hu/bonding/if_bonding.h.diff
http://anubis.mw.hu/bonding/readme.txt

this is for an older kernel version so the patch would have to be manually applied.. if you could tell me where to get your config.gz for the kernel in r16 i will try to apply the patch to 3.2.2 kernel source.
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Feb 27, 2012 7:16 am    Post subject: Reply with quote

Hi,

boot the image and then in /proc/ get config.gz

ciao
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Feb 27, 2012 1:52 pm    Post subject: Reply with quote

Hi,

when I have compiled the kernel I suppose DomU ( like guest ) into Dom0 ( like host ).
Is it correct ?

make menuconfig

1) pae enabled
2) add xen support
3) make
4) make modules_install
5) put all modules more o less ( sata/ata/xen) into initrd
6) /boot/grub/menu.conf

Image boot with default xen image enabled, in my virtulabox environments boot too.
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Thu Mar 01, 2012 5:04 pm    Post subject: Reply with quote

Hi

new kernel version 3.2.9 + DomU kenel 3.2.2

http://www.renatomorano.net/?p=1279

Laughing
renato
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Mar 05, 2012 9:24 am    Post subject: Reply with quote

Hi,

configure options

[*] Xen guest support
CONFIG_XEN: This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the Xen hypervisor.
[*] Xen PCI Frontend
CONFIG_XEN_PCIDEV_FRONTEND:
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains
[*] Xen memory balloon driver
[*] Scrub pages before returning them to system
<*> Xen /dev/xen/evtchn device
[*] Backend driver support
<*> Xen filesystem
[*] Create compatibility mount point /proc/xen
[*] Create xen entries under /sys/hypervisor
<M> userspace grant access device driver
<M> User-space grant reference allocator driver
<M> Xen PCI-device backend driver
Back to top
View user's profile Send private message
nickphx



Joined: 15 Feb 2012
Posts: 9

PostPosted: Wed Mar 21, 2012 3:06 pm    Post subject: Reply with quote

nickphx wrote:
renato.morano wrote:
Hi,

please send me the patch Wink

I hope there are some changes to do to define new model of round robin into zeroshell GUI.


http://anubis.mw.hu/bonding/bonding.h.diff
http://anubis.mw.hu/bonding/bond_main.c.diff
http://anubis.mw.hu/bonding/if_bonding.h.diff
http://anubis.mw.hu/bonding/readme.txt

this is for an older kernel version so the patch would have to be manually applied.. if you could tell me where to get your config.gz for the kernel in r16 i will try to apply the patch to 3.2.2 kernel source.



I emailed the author of the original patch. He provided a more recent patch for kernel version 2.6.32-5-amd64.

http://174.138.166.33/bonding.bz2

edit: updated link.


Last edited by nickphx on Tue Jun 26, 2012 5:58 pm; edited 1 time in total
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Mon Jun 04, 2012 1:22 pm    Post subject: Reply with quote

I'm proud to annunce

http://brillig.org/~rmorano/zs_337.img.bz2

as always
http://www.renatomorano.net/?p=1279

thaks a lot.

please let me know if the image is working Smile
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Tue Jun 26, 2012 12:19 pm    Post subject: patch nedeed Reply with quote

Dear Nick,

can you send again the patch.

I can't wait.

Smile



nickphx wrote:
nickphx wrote:
renato.morano wrote:
Hi,

please send me the patch Wink

I hope there are some changes to do to define new model of round robin into zeroshell GUI.


http://anubis.mw.hu/bonding/bonding.h.diff
http://anubis.mw.hu/bonding/bond_main.c.diff
http://anubis.mw.hu/bonding/if_bonding.h.diff
http://anubis.mw.hu/bonding/readme.txt

this is for an older kernel version so the patch would have to be manually applied.. if you could tell me where to get your config.gz for the kernel in r16 i will try to apply the patch to 3.2.2 kernel source.



I emailed the author of the original patch. He provided a more recent patch for kernel version 2.6.32-5-amd64.

http://174.138.166.35/2.6.32-5.bonding.bz2
Back to top
View user's profile Send private message
nickphx



Joined: 15 Feb 2012
Posts: 9

PostPosted: Tue Jun 26, 2012 6:04 pm    Post subject: Re: patch nedeed Reply with quote

renato.morano wrote:
Dear Nick,

can you send again the patch.

I can't wait.

Smile



nickphx wrote:
nickphx wrote:
renato.morano wrote:
Hi,

please send me the patch Wink

I hope there are some changes to do to define new model of round robin into zeroshell GUI.


http://anubis.mw.hu/bonding/bonding.h.diff
http://anubis.mw.hu/bonding/bond_main.c.diff
http://anubis.mw.hu/bonding/if_bonding.h.diff
http://anubis.mw.hu/bonding/readme.txt

this is for an older kernel version so the patch would have to be manually applied.. if you could tell me where to get your config.gz for the kernel in r16 i will try to apply the patch to 3.2.2 kernel source.



I emailed the author of the original patch. He provided a more recent patch for kernel version 2.6.32-5-amd64.

http://174.138.166.35/2.6.32-5.bonding.bz2


Excellent! I have replied to your private message and updated the link above.. If you're able to make this work I am willing to pay you! Please let me know how much.
thanks,
nick
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Thu Jun 28, 2012 5:01 am    Post subject: Reply with quote

Ciao,

mode=0 (balance-rr)
Round-robin policy: Transmit packets in sequential order from the first available slave through the last. This mode provides load balancing and fault tolerance.

mode=1 (active-backup)
Active-backup policy: Only one slave in the bond is active. A different slave becomes active if, and only if, the active slave fails. The bond's MAC address is externally visible on only one port (network adapter) to avoid confusing the switch. This mode provides fault tolerance. The primary option affects the behavior of this mode.

mode=2 (balance-xor)
XOR policy: Transmit based on [(source MAC address XOR'd with destination MAC address) modulo slave count]. This selects the same slave for each destination MAC address. This mode provides load balancing and fault tolerance.

mode=3 (broadcast)
Broadcast policy: transmits everything on all slave interfaces. This mode provides fault tolerance.

mode=4 (802.3ad)
IEEE 802.3ad Dynamic link aggregation. Creates aggregation groups that share the same speed and duplex settings. Utilizes all slaves in the active aggregator according to the 802.3ad specification.

Pre-requisites:
1. Ethtool support in the base drivers for retrieving
the speed and duplex of each slave.
2. A switch that supports IEEE 802.3ad Dynamic link
aggregation.
Most switches will require some type of configuration
to enable 802.3ad mode.

mode=5 (balance-tlb)
Adaptive transmit load balancing: channel bonding that does not require any special switch support. The outgoing traffic is distributed according to the current load (computed relative to the speed) on each slave. Incoming traffic is received by the current slave. If the receiving slave fails, another slave takes over the MAC address of the failed receiving slave.

Prerequisite:
Ethtool support in the base drivers for retrieving the
speed of each slave.

mode=6 (balance-alb)
Adaptive load balancing: includes balance-tlb plus receive load balancing (rlb) for IPV4 traffic, and does not require any special switch support. The receive load balancing is achieved by ARP negotiation. The bonding driver intercepts the ARP Replies sent by the local system on their way out and overwrites the source hardware address with the unique hardware address of one of the slaves in the bond such that different peers use different hardware addresses for the server.

The most used are the first four mode types...

Now we have mode=0 (balance-rr) and mode=1 (active-backup).

but if we need mode 5,6 we can change the file
/root/kerbynet.cgi/template/bondconfig

and add the rows:

<input type=radio name=Type value=5 <xvar ATLBCHECKED>
onclick="typechanged()">&nbsp;&nbsp;Adaptive transmit load
balancing<br>
<input type=radio name=Type value=6 <xvar ALBCHECKED>
onclick="typechanged()">&nbsp;&nbsp;Adaptive load balancing<br>

to have an persistent configuration

in active profile mkdir dir bond
and cp /root/kerbynet.cgi/template/bondconfig /Database/bond/
then in tab Pre Boot script
we add

cat /Database/bond/bondconfig >/root/kerbynet.cgi/template/bondconfig

.
at the end

Back to top
View user's profile Send private message
webtime



Joined: 02 Jul 2012
Posts: 5

PostPosted: Mon Jul 02, 2012 1:00 pm    Post subject: Spettacolo ---> Per Morano!!!!!!! Reply with quote

Ciao a tutto il Forum!!!!
Vorrei sapere se e possibile (se si come va fatto) ricreare l'immagine della CF dalla versione di sviluppo per poterla testare su altro hardware..
Grazie.
Back to top
View user's profile Send private message
renato.morano



Joined: 21 Apr 2011
Posts: 49

PostPosted: Wed Jul 04, 2012 12:24 pm    Post subject: Reply with quote

HI,

ma il tuo italiano perfetto Smile
Back to top
View user's profile Send private message
webtime



Joined: 02 Jul 2012
Posts: 5

PostPosted: Thu Jul 05, 2012 12:03 pm    Post subject: Reply with quote

sI, sono italiano!!!
Secondo te come possibile fare quello che ti chiedo?

I rewrite my question in english:
How can i recreate the CF image for testing on another system after modify
the html page of the above post??
Thanks for answer...
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group