www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

routing VLANS over multiple interfaces

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
ixalthim



Joined: 20 May 2013
Posts: 17

PostPosted: Mon May 20, 2013 7:39 pm    Post subject: routing VLANS over multiple interfaces Reply with quote

Hi, I have tried a few things, but can't seem to get this working...

I have 2 switches...we'll call them the Lab switch and the Showroom switch.

Lab is VLAN 102, and Showroom is VLAN 101.

Both of these switches are uplinked to a Zeroshell box, but to independent NIC's.

How can I configure VLAN 101 on the Lab switch so that it communicated to the showroom VLAN (102)?

I have tried adding VLAN 101 to the LAB interface on zeroshell, but that doesn't seem to work.

Any help would be appreciated. And I should also mention that the VLAN's in the respective area are fine, and I can communicate between vlans just fine...it's just that I can't add VLAN 101 to the Lab switch. And, yes, I have trunked VLAN 101 on the Lab switch.
Back to top
View user's profile Send private message
redfive



Joined: 27 Aug 2009
Posts: 232

PostPosted: Tue May 21, 2013 10:50 am    Post subject: Reply with quote

Did you set an ip address on vlans 101 and 102 on ZS ? this ip will be the default-gw for those networks.....But ...with two interfaces on ZS and "only" two vlans, why you need ...vlans ?
Greetings
Back to top
View user's profile Send private message
ixalthim



Joined: 20 May 2013
Posts: 17

PostPosted: Tue May 21, 2013 6:43 pm    Post subject: Reply with quote

I actually have 4 interfaces, and multiple VLAN's, I was just trying to keep it simple.

Yes, I have IP addresses on the VLAN's.

My issue, I think may go back to the corporate switch...it may not be a zeroshell issue at all.

I'll let you know as soon as I have more info.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group