www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

New release 2.0.RC3

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell
View previous topic :: View next topic  
Author Message
fulvio
Site Admin


Joined: 01 Nov 2006
Posts: 1070

PostPosted: Wed Aug 07, 2013 6:06 pm    Post subject: New release 2.0.RC3 Reply with quote

Hi,

with the release 2.0.RC3 of Zeroshell some security issues have been corrected. Specifically, now the DNS works as cache and accepts recursive queries only for local networks if not configured otherwise. Recently, the DNS fully opened are being used to carry out DDoS attacks resulting in bandwidth consumption. For this reason, the migration to 2.0.RC3 is strongly recommended.
No-IP has been added as a provider for dynamic DNS and the recognition of 3G USB modems has been enhanced. You can now disable the virus scan of web pages resulting in improved performance of the transparent proxy on modest hardware.
Several fixes have been applied on the procedure for Backup and Restore of the profiles.

Regards
Fulvio


Last edited by fulvio on Thu Jan 02, 2014 10:53 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
m_elias



Joined: 07 Nov 2012
Posts: 30

PostPosted: Thu Aug 08, 2013 11:59 pm    Post subject: Reply with quote

Excellent!! Any changes to how data over bonded VPN tunnels is handled?
Back to top
View user's profile Send private message
fulvio
Site Admin


Joined: 01 Nov 2006
Posts: 1070

PostPosted: Sat Aug 10, 2013 2:12 pm    Post subject: Reply with quote

I am planning to introduce a modified round robin mode in which the amount of data is sent on each interface of a bond is proportional to its bandwidth dynamically calculated. I hope to implement it soon.

Regards
Fulvio
Back to top
View user's profile Send private message Send e-mail
m_elias



Joined: 07 Nov 2012
Posts: 30

PostPosted: Sat Aug 10, 2013 7:35 pm    Post subject: Reply with quote

Sounds interesting.

The reason I ask, is that with 2.0 RC1 I had issues where the ACKs for each VPN tunnel were being sent down all the tunnels, creating a lot of excess uploads which in turn really hampered my DSL connections' download speeds.

Also, since you mentioned a modified mode, I have long thought it would be nice to have a mode where all the data was transmitted over all VPN tunnels but only the first received of each packet was accepted, the rest would be dropped. This would allow for an ultra-stable connection and lose of tunnels should be completely seamless to the user at the expense of the wasted bandwidth.
Back to top
View user's profile Send private message
Maklaut



Joined: 29 Mar 2012
Posts: 10

PostPosted: Sat Nov 09, 2013 8:25 pm    Post subject: Reply with quote

Seems what l7-filter does not work in 2.0RC3.
As I see it begins from 2.0RC1

Fulvio, which l7-filter kernel patch you are applied on 3.4.x kernel?

upd: just posted a bug report
Back to top
View user's profile Send private message
corvinav



Joined: 10 Dec 2013
Posts: 1

PostPosted: Tue Dec 10, 2013 1:03 am    Post subject: Reply with quote

Hi. How can i compile app for the rc3. For example igmpproxy. Or have another way to work iptv on zeroshell? Thanks.
Back to top
View user's profile Send private message
Yhoni



Joined: 19 May 2013
Posts: 31

PostPosted: Sun Dec 15, 2013 8:33 am    Post subject: Reply with quote

Thanks for your work.

Regards.
Back to top
View user's profile Send private message
Maklaut



Joined: 29 Mar 2012
Posts: 10

PostPosted: Sun Dec 15, 2013 9:18 am    Post subject: Reply with quote

corvinav wrote:
Hi. How can i compile app for the rc3. For example igmpproxy. Or have another way to work iptv on zeroshell? Thanks.

Gcc , binutils and other libs available in download section.
I tried igmpproxy few weeks ago but it freeze my gw very hard. The udpxy works much better. I'm suggest to use udpxy.
Back to top
View user's profile Send private message
DrmCa



Joined: 12 Apr 2011
Posts: 199

PostPosted: Sun Dec 15, 2013 3:35 pm    Post subject: Reply with quote

Can anyone confirm that load balancing works in RC3?
Back to top
View user's profile Send private message
newreal



Joined: 24 Jan 2012
Posts: 1

PostPosted: Wed Dec 18, 2013 7:39 am    Post subject: Reply with quote

DrmCa wrote:
Can anyone confirm that load balancing works in RC3?


It works for me
3 wan access (dsl, cable, wifi bridge)

Newreal
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> ZeroShell All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group