www.zeroshell.org Forum Index www.zeroshell.org
Linux Distribution for server and embedded devices
 
 SearchSearch  RegisterRegister  UsergroupsUsergroups 
 ProfileProfile  Log inLog in  Log in to check your private messagesPrivate Message 

Configuring zeroshell as a router in vmware

 
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Networking
View previous topic :: View next topic  
Author Message
HiTekRedNek



Joined: 05 Feb 2008
Posts: 1

PostPosted: Tue Feb 05, 2008 10:19 am    Post subject: Configuring zeroshell as a router in vmware Reply with quote

Hi, This is a complete N00bie question. I have had very limited experience in Linux and I am just so so in routing knowledge. What I am looking for is either help or a link to a tutorial about a specific VMWARE tutorial.
I am looking to use zeroshell to route between my 2 LAN segments that I have configured under a VMWARE workstation team. I am building a multi site AD/DNS infrustructure simulation and would like to have the ability to be able to also see the outside world because I want to setup DNS forwarding through at least one of the sites. I may also want to configure a WSUS server to grab updates. Ideally I would like to isolate my virtual LAN's from the physical.

My network summary
Physical LAN = 192.168.2.0/24 def g/w 192.168.2.1
LAN A = 192.168.149.0/24 (VMNET3)
LAN B = 192.168.96.0/24 (VMNET4)

Much thanks to anybody who can provide some assistance.[/b]
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    www.zeroshell.org Forum Index -> Networking All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group