www.zeroshell.org

[Delio]

I did tests with firewall ZeroShell.
Rules in INPUT e OUTPUT is not functionaly. Only chain FORWARD.
Example:
There are 2 ethernet interfaces
ETH00 and ETH01 = BRIDGE00

Rule CHAIN: INPUT (Not functionaly)
Interface input ETH00 DROP ALL Destination 10.10.10.2

Rule CHAIN: OUTPUT (Not functionaly)
Interface output ETH01 DROP ALL Destination 10.10.10.2

Rule CHAIN: FORWARD (Functionaly)
Interface input (all - blank)
Interface output ETH01 DROP ALL Destination 10.10.10.2

My rules is incorret or error in ZeroShell?
If my rules is incorret, because rules chain INPUT or OUTPUT is not functionaly?

Tank you