www.zeroshell.org

matthew.a.squires · Joined: 03 Jul 2008 Posts: 89

I have OpenVPN installed on my WinXP OS and the TAP Win32 Adapter maximum speed is 10Mbs.

QUESTION: What is the “OpenVPN LAN-to-LAN VPN” maximum connection Speed in Zeroshell?

======================================================

The Reason for the question!

I will be running four dedicated Up/Down 10Mbps connections.

My idea is to BOND the four 10Mbps connections with Fault Tolerance and Load Balancing. I will then create four LAN-to-LAN VPN connections and BOND them on both ends.

My reason for creating the four LAN-to-LAN VPN connections is also for the Fault Tolerance and Load Balancing, assuming that each VPN connection has a max speed of 10Mbps.

The LAN-to-LAN VPN Connection will be between two sites.
What is your thought?

Thank You;
Matthew Squires

fulvio · Site Admin Joined: 01 Nov 2006 Posts: 997

Don't worry max bandwidth of OpenVPN is limited only by CPU performances.

Regards
Fulvio

matthew.a.squires · Joined: 03 Jul 2008 Posts: 89

I apologize, but I do not completely understand your reply.

Is the "Zeroshell OpenVPN LAN-to-LAN" bandwidth limited to 10mb, just at the Windows version of OpenVPN? Or can it go as high as a 100mb or 1000mb?
_________________
Thank You;
Matthew Squires

fulvio · Site Admin Joined: 01 Nov 2006 Posts: 997

There is not a fixed limit. For example with the Pentium 4 2GHz Processors I get 160Mbit/s with netperf.

Regards
Fulvio

matthew.a.squires · Joined: 03 Jul 2008 Posts: 89

I understand.
_________________
Thank You;
Matthew Squires