Reply To: DMZ & Port Forward Range

Forums Network Management Request a new feature DMZ & Port Forward Range Reply To: DMZ & Port Forward Range


I was asking if there are plans to include a DMZ setting that can be configured from the Web Interface.

Normally, I would have to forward ports to a particular address. So that the service of that particular server will be available from the WAN.

With a DMZ options, one of the LAN clients server will not be blocked by the Firewall.

My goal is to place a Dead End PC in the DMZ Zone. That way, would be Intruders / Hackers would be attacking a PC that has no other Network access and contains No Information or at lease Bogus Information.

I do not know
if there is great wisdom in my request, but I believe it could reduce the attacks on my legitimate servers accessible from the WAN