Skip to content

Zeroshell Linux Router

Routing and Bridging Firewall Solutions

  • News
  • Hardware
  • Download
  • Forums
  • FAQ
    • General questions
    • Storage
    • Network
    • VPN
    • Wireless
  • Video
  • Contact
  • Login

Reply To: Lan to Lan config

› Forums › Network Management › VPN › Lan to Lan config › Reply To: Lan to Lan config

April 23, 2010 at 10:40 am #50192
ppalias
Member

Change the internal IP address of the Fritzbox to 192.168.1.1/24, 192.168.2.1/24 and 192.168.3.1/24

News

  • Zeroshell End of Life
  • Zeroshell 3.9.5 released
  • New release and critical vulnerability
  • New Kernel 4.14.83
  • LogMeIn Hamachi VPN Client available for Zeroshell

Documentation

  • Multiple Internet Connections
  • QoS and Traffic Shaping
  • Hotspot using Captive Portal
  • RADIUS Accounting
  • Mobile Internet Connection
  • Wireless Access Point
  • OpenVPN Gateway
  • OpenVPN Client Configuration
  • Transparent Web Proxy
  • Captive Portal SAML 2.0
  • OpenDNS setup
  • Deep Packet Inspection
  • Traffic Statistics
  • Kerberos 5 Tutorial
    • Introduction
    • Aims
    • Definitions and terms
    • Operation
    • Tickets
    • Kerberos Cross Authentication
  • X.509 CA
  • RADIUS
  • VPN
  • Firewall
  • LDAP

Recent Topics

  • VPN HTTP/S connection through zeroshell
  • Zeroshell VPN Site to Site Server
  • i want to make a splash page capable of sending messages to zeroshell
  • Kerberos 5 Username contain strange caracters
  • Multiple SSIDs in Orange Pi Zero (ZeroShell 3.8.2a)
  • VLAN firewall rules for LAN and 1 VLAN setup
  • How To Establish Security With VPNs
  • Proxy is not working at all
  • How to connect with available Wifi Or hotspot?
  • IPs blocked by a firewall drop rule cannot be pinged but still pass through NAT
  • Block one host of a network on the DNS but not the whole network. How?
  • VPN – Client connects without certificate
  • Client connects without certificate
  • Best load balancing set up with zeroshell for an internet cafe
  • pi-hole
  • Wireless Access Point
  • softether
  • Development stalled?
  • usb wifi nics on raspberry
  • “waiting for boot device” installing zeroshell on a M2 SSD
  • captive portal zeroshell
  • hostname too long
  • hello
  • Activation Key Not recieved
  • Blocking website pages
  • User authentication is ok but zeroshell does not assign the ip from pool
  • Leases for wireless AP do not show
  • Wireless AP should not be a router gateway
  • Not recommended in “Best free Linux router and firewall distributions of 2020”
  • NETBALANCER Failover problem or wrong configuration…Help!

Recent Replies

  • Activation Key Not recieved
  • Register G729a Codec From Digum
  • APU2 speciffic drivers
  • VPN HTTP/S connection through zeroshell
  • Activation Key Not recieved
  • How To Establish Security With VPNs
  • Using ZeroShell as a VM-Lab networking device with WiFi uplink
  • Your account has expired, please contact the administrator
  • Can't boot Zeroshell 3.9.3A on Raspberry Pi 3 B Rev. 2
  • Development stalled?
  • Development stalled?
  • Development stalled?
  • Development stalled?
  • Can’t get Zeroshell authentication page automatically
  • Can’t get Zeroshell authentication page automatically
  • Development stalled?
  • Activation Key Not recieved
  • Activation Key Not recieved
  • Development stalled?
  • vpn -iphone
Copyright (C) 2005-2018 by Fulvio Ricciardi - Lecce (Italy) | Theme: News Portal by Mystery Themes.
  • Twitter
  • Facebook
  • LinkedIn