192.168.142.142 ???

› Forums › Network Management › ZeroShell › 192.168.142.142 ???

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 21, 2008 at 10:00 pm #40877
    OnHeL
    Member

    This is in my krb5kdc logs.

    I’m using Zeroshell on a WRAP board using only 1 eth interface. All other interfaces are down. Only using the RADIUS function of ZeroShell. All other functions, Router, DHCP, VPN, DNS, QoS are disabled.


    
16:45:45 	listening on fd 6: udp xxx.xxx.xxx.xxx.750
    
16:45:45 	listening on fd 7: udp xxx.xxx.xxx.xxx.88
    
16:45:45 	listening on fd 8: udp 192.168.142.142.750
    
16:45:45 	listening on fd 9: udp 192.168.142.142.88
    
16:45:45 	set up 4 sockets
    
16:45:45 	commencing operation
    
16:46:16 	AS_REQ (7 etypes {18 17 16 23 1 3 2}) 192.168.142.142: ISSUE: authtime 1200951976, etypes {rep=18 tkt=1 ses=18}, admin@ZZZZZZZZZZZZ.NET for krbtgt/ZZZZZZZZZZZZ.NET@ZZZZZZZZZZZZZ.NET

    Can anyone explain why ZeroShell is listening on 192.168.142.142 which is listed in addition to my LAN subnet?

    January 21, 2008 at 10:34 pm #46106
    imported_fulvio
    Participant

    Hi,
    Zeroshell uses its Kerberos 5 KDC to authenticate the admin session, but MIT Kerberos 5 it’is not able to use the loopback interface 127.0.0.1. For this reason, I had to add a dummy interface with the IP 192.168.142.142.

    Regards
    Fulvio

    January 21, 2008 at 11:23 pm #46107
    OnHeL
    Member

    Understood Fulvio, thanks for the quick reply.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.