Bandwidth Management on Bridge

› Forums › Network Management › ZeroShell › Bandwidth Management on Bridge

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 2, 2007 at 2:00 am #40587
    l.santiago
    Member

    Hi;

    How can we setup bandwidth management on the bridge interface for diferent ip or host.

    April 2, 2007 at 5:54 pm #45254
    imported_fulvio
    Participant

    You should follow the procedure described at the URL http://www.zeroshell.net/eng/qos/
    and instead to use only l7-filter in the QoS classifier, you have to classify the traffic by using the source IP addresses or the source MAC addresses of your hosts.

    Regards
    Fulvio

    April 4, 2007 at 10:15 pm #45255
    l.santiago
    Member

    Hi Fulvio;

    Exelent work on this aplication. We are doing someting wrong.

    MARK all opt — in * out * 69.89.36.43 -> 0.0.0.0/0 MAC 00:15:C5:CB:83:D7 MARK set 0xd 320KBPS no

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.