Booting the Kernel

› Forums › Network Management › ZeroShell › Booting the Kernel

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 27, 2010 at 7:41 am #42548
    kent
    Member

    Hi,

    Please help me a bit of a problem I’m facing a longer period. I installed a system Zeroshell I made some settings for Load Balance, and after I gave reboot, did not want to start. All that says is:

    GRUB Loading stage1.5.
    GRUB Loading…Please wait…
    Decompressing Linux… Done.
    Booting the kernel.
    _

    Thank you

    July 27, 2010 at 10:24 am #50805
    ppalias
    Member

    I don’t think it has to do with the changes in Load Balancer. Looks as if something is corrupted on the hard drive and cannot boot normally. Try to boot from a linux cd and run fsck to check for errors on the drive.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.