Bridging 2 networks via bonded VPN

› Forums › Network Management › Bridges and Routers › Bridging 2 networks via bonded VPN

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 27, 2012 at 4:45 pm #43510
    btklister
    Participant

    What is the correct way to bridge two networks connected via bonded VPNs?

    In server side i bridged BOND interface with ETH00 interface, in client side i bridge the ETH00 with BOND too, but doesn’t work.

    If in the client side í bridge BOND with ETH01, i can get IP via DHCP,present in server side, and ping several host in both networks and public IPs. However, when i try to open websites or open zeroshell web interface via the bridge nothing happens.

    Anyone can help me? Tanks.

    December 17, 2012 at 11:10 am #52540
    btklister
    Participant

    Problem solved,

    Apparently it was a MTU problem, seting –mssfix 1400 in the VPNs solve it

    December 20, 2012 at 3:42 pm #52541
    m_elias
    Member

    Does this fix only help when both ends are bridged or even if only one end of the bond is bridged?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.