Can not add a Default Gateway …

[FurFrog]

Hi,
first of all: pls excuse my bad english, I´m german.

So now my problem is, that in network-setup from Zeroshell, I can´t place a default gateway.
Everytime I tried to set it up, and give him the IP of my router (192.168.1.254) it ends up like:
ERROR: Default Gateway not added: gateway 192.168.1.254 is not directly connected.

But it is directly connected … 🙁

Any ideas?
Pls help

Greets from sunny germany

[imported_fulvio]

Are you sure that your router Zeroshell has an interface on which an IP belonging to the the subnet 192.168.1.0/255.255.255.0 is defined?

[FurFrog]

Hi,
well, I can only add manually a gateway in Router-Menu from zeroshell.
Looks like this:

Destination: 192.168.1.0
Netmask: 255.255.255.0
Type: Net
Metric: 1
Gateway: 192.168.1.254
Interface:
State: Up

Doesn´t help …

Whats wrong?

[imported_fulvio]

Ok, but before adding the gateway you need to add an IP belonging to the class 192.168.1.0/24 to the interface directly connected to the router. To Add an IP use the button [Add IP] from the section [Setup]->[Network] of the web interface.

Regards
Fulvio

[FurFrog]

Hey, works fine now !
Thanks for guiding.
Just one more question, but its possibly the wrong forum:
Is it possible to open a default page after the captive portal login?

Greets

[imported_fulvio]

You are right, this is a wrong place to ask for captive portal.

Regards
Fulvio

[Author]

Posts