› Forums › Network Management › ZeroShell › Cron log
- This topic is empty.
-
AuthorPosts
-
October 10, 2014 at 1:02 am #44067
iridiu
MemberI receive this in cron log
03:46:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
03:47:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:48:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:48:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
03:49:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:50:01 (root) CMD (/root/kerbynet.cgi/scripts/alert OVERLOAD)
03:50:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
03:50:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:51:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:52:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
03:52:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
03:53:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)November 17, 2014 at 6:29 pm #53505plane
Member11:11:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
11:12:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
11:12:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
11:13:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
11:14:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
11:14:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DDOS)
11:15:01 (root) CMD (/root/kerbynet.cgi/scripts/alert OVERLOAD)
11:15:01 (root) CMD (/root/kerbynet.cgi/scripts/cleantmp)
11:15:01 (root) CMD (/root/kerbynet.cgi/scripts/alert DISKFULL)
11:15:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)
11:16:01 (root) CMD (/root/kerbynet.cgi/scripts/alert MEMFULL)I was getting that error, so I rebooted. the output is after rebooting.
Any ideas?
CPU ( 2) Intel(R) Atom(TM) CPU D425 @ 1.80GHz 1795MHz
Uptime 0 days, 0:20
Load Avg 0.08 0.08 0.05
Kernel 3.4.90-ZS
Memory 2062828 kBNovember 17, 2014 at 8:13 pm #53506redfive
ParticipantThose aren’t errors, the check of each event in “Monitoring” is launched every n° minutes, (eg. DDOS every two minutes, DISKFULL every 15 minutes, MEMFULL every minute, and so on, you can see how and when they are executed by clicking on each event in “Monitoring” ), and are reported in the logs.
Regards -
AuthorPosts
- You must be logged in to reply to this topic.