› Forums › Network Management › ZeroShell › DHCP sevrer on VLAN
- This topic is empty.
-
AuthorPosts
-
August 28, 2014 at 4:40 pm #44026
staifan13
MemberHi all,
How do I do too run the DHCP server on a VLAN ?I ask this because my DHCP server works fine on several IP ranges on my ETH01 network interface (192.168.1.0/24, 192.168.2.0/26 and 192.168.3.0/26). I just created the VLAN ETH01.1 with IP 192.168.254.0/26 but I can not run the DHCP server on that VLAN.
If anyone can help me thank you in advance .Staifan
I run ZS 3.1.0
This is teh DHCPD log :
17:53:44 Internet Systems Consortium DHCP Server V3.1-ESV
17:53:44 Copyright 2004-2010 Internet Systems Consortium.
17:53:44 All rights reserved.
17:53:44 For info, please visit https://www.isc.org/software/dhcp/
17:53:44 WARNING: Host declarations are global. They are not limited to the scope you declared them in.
17:53:44 Internet Systems Consortium DHCP Server V3.1-ESV
17:53:44 Copyright 2004-2010 Internet Systems Consortium.
17:53:44 All rights reserved.
17:53:44 For info, please visit https://www.isc.org/software/dhcp/
17:53:44 WARNING: Host declarations are global. They are not limited to the scope you declared them in.
17:53:44 Internet Systems Consortium DHCP Server V3.1-ESV
17:53:44 Copyright 2004-2010 Internet Systems Consortium.
17:53:44 All rights reserved.
17:53:44 For info, please visit https://www.isc.org/software/dhcp/
17:53:44 WARNING: Host declarations are global. They are not limited to the scope you declared them in.
17:53:44 Wrote 0 deleted host decls to leases file.
17:53:44 Wrote 0 new dynamic host decls to leases file.
17:53:44 Wrote 0 leases to leases file.
17:53:44 Listening on LPF/ETH01.1/00:24:01:ee:18:83/192.168.254.0/26
17:53:44 Sending on LPF/ETH01.1/00:24:01:ee:18:83/192.168.254.0/26
17:53:44
17:53:44 No subnet declaration for VPN99 (192.168.250.254).
17:53:44 ** Ignoring requests on VPN99. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface VPN99 is attached. **
17:53:44
17:53:44
17:53:44 No subnet declaration for ETH00 (192.168.0.75).
17:53:44 ** Ignoring requests on ETH00. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface ETH00 is attached. **
17:53:44
17:53:44 Listening on LPF/ETH01/00:24:01:ee:18:83/SN_192.168.1.0M255.255.255.0_192.168.2.0M255.255.255.192_192.168.3.0M255.255.255.192
17:53:44 Sending on LPF/ETH01/00:24:01:ee:18:83/SN_192.168.1.0M255.255.255.0_192.168.2.0M255.255.255.192_192.168.3.0M255.255.255.192
17:53:44 Sending on Socket/fallback/fallback-net
17:53:44 There's already a DHCP server running.
17:53:44
17:53:44 If you did not get this software from ftp.isc.org, please
17:53:44 get the latest from ftp.isc.org and install that before
17:53:44 requesting help.
17:53:44
17:53:44 If you did get this software from ftp.isc.org and have not
17:53:44 yet read the README, please read it before requesting help.
17:53:44 If you intend to request help from the dhcp-server@isc.org
17:53:44 mailing list, please read the section on the README about
17:53:44 submitting bug reports and requests for help.
17:53:44
17:53:44 Please do not under any circumstances send requests for
17:53:44 help directly to the authors of this software - please
17:53:44 send them to the appropriate mailing list as described in
17:53:44 the README file.
17:53:44
17:53:44 exiting.
17:53:44 WARNING: Host declarations are global. They are not limited to the scope you declared them in.
17:53:44 Wrote 0 deleted host decls to leases file.
17:53:44 Wrote 0 new dynamic host decls to leases file.
17:53:44 Wrote 0 leases to leases file.
17:53:44
17:53:44 No subnet declaration for VPN99 (192.168.250.254).
17:53:44 ** Ignoring requests on VPN99. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface VPN99 is attached. **
17:53:44
17:53:44
17:53:44 No subnet declaration for ETH00 (192.168.0.75).
17:53:44 ** Ignoring requests on ETH00. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface ETH00 is attached. **
17:53:44
17:53:44 Internet Systems Consortium DHCP Server V3.1-ESV
17:53:44 Copyright 2004-2010 Internet Systems Consortium.
17:53:44 All rights reserved.
17:53:44 For info, please visit https://www.isc.org/software/dhcp/
17:53:44 WARNING: Host declarations are global. They are not limited to the scope you declared them in.
17:53:44 Wrote 0 deleted host decls to leases file.
17:53:44 Wrote 0 new dynamic host decls to leases file.
17:53:44 Wrote 0 leases to leases file.
17:53:44 Listening on LPF/ETH01.1/00:24:01:ee:18:83/192.168.254.0/26
17:53:44 Sending on LPF/ETH01.1/00:24:01:ee:18:83/192.168.254.0/26
17:53:44
17:53:44 No subnet declaration for VPN99 (192.168.250.254).
17:53:44 ** Ignoring requests on VPN99. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface VPN99 is attached. **
17:53:44
17:53:44
17:53:44 No subnet declaration for ETH00 (192.168.0.75).
17:53:44 ** Ignoring requests on ETH00. If this is not what
17:53:44 you want, please write a subnet declaration
17:53:44 in your dhcpd.conf file for the network segment
17:53:44 to which interface ETH00 is attached. **
17:53:44
17:53:44 Listening on LPF/ETH01/00:24:01:ee:18:83/SN_192.168.1.0M255.255.255.0_192.168.2.0M255.255.255.192_192.168.3.0M255.255.255.192
17:53:44 Sending on LPF/ETH01/00:24:01:ee:18:83/SN_192.168.1.0M255.255.255.0_192.168.2.0M255.255.255.192_192.168.3.0M255.255.255.192
17:53:44 Sending on Socket/fallback/fallback-net
17:53:44 There's already a DHCP server running.
17:53:44
17:53:44 If you did not get this software from ftp.isc.org, please
17:53:44 get the latest from ftp.isc.org and install that before
17:53:44 requesting help.
17:53:44
17:53:44 If you did get this software from ftp.isc.org and have not
17:53:44 yet read the README, please read it before requesting help.
17:53:44 If you intend to request help from the dhcp-server@isc.org
17:53:44 mailing list, please read the section on the README about
17:53:44 submitting bug reports and requests for help.
17:53:44
17:53:44 Please do not under any circumstances send requests for
17:53:44 help directly to the authors of this software - please
17:53:44 send them to the appropriate mailing list as described in
17:53:44 the README file.
17:53:44
17:53:44 exiting.August 28, 2014 at 4:53 pm #53436redfive
ParticipantIn DHCP section , “New” button, you should be able to find the new 192.168.254.0/26 network, and then create the scope.
RegardsAugust 28, 2014 at 6:03 pm #53437staifan13
MemberIt’s already done . In the log the DHCP server seems to work but the client doesn’t colect the IP .
August 28, 2014 at 7:10 pm #53438redfive
ParticipantBut are you using a managed switch or anyway a vlan aware device, between Zs and the client ? If not , the client will get the ip address from the network which is on the untagged/native vlan, not from the tagged one.
RegardsAugust 30, 2014 at 1:02 pm #53439staifan13
Memberredfive,
it’s that . I have a switch between ZS and the client . So I looked here and there on the web and I realized that most of the switch handle or not VLAN. So I lean over and thank you for the information. -
AuthorPosts
- You must be logged in to reply to this topic.