how2 setup&run ZS on PC with 256Mb RAM & built-in CF

› Forums › Network Management › ZeroShell › how2 setup&run ZS on PC with 256Mb RAM & built-in CF

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 28, 2010 at 2:32 pm #42612
    xtacy
    Member

    Hi!
    I got a PC with 256Mb RAM and built-in CF-reader (Kontron 886LCD-M/mITX BGA).
    When i tried to use a ZeroShell-1.0.beta9-CompactFlash-1GB.img.gz image (thought it means size of CF) it couldn’t start saying “not enough memory to load image”. So as i understood it wants a 1Gb of RAM instead of my 256 (or 96 as of MSR).

    Now what should i do? Which image should i use with my CF(2Gb)?

    thanx

    August 28, 2010 at 9:47 pm #51015
    ppalias
    Member

    Here are the hardware requirements. The byte size at the name of the file suggests CF size. You should use more later versions like beta12 or beta13 instead of the old beta9.

    August 29, 2010 at 2:09 pm #51016
    xtacy
    Member

    My PC exceeds the MSR (Minimum System Requirements).
    But there is no newer than beta 9 version in Description column… Should i use the
    1GB image for IDE, SATA e USB disks 1.0.beta13 July 2, 2010 ZeroShell-1.0.beta13-CompactFlash-IDE-USB-SATA-1GB.img.gz 132MB?
    well, i’ll try it anyway.
    thanx.

    August 30, 2010 at 7:13 am #51017
    ppalias
    Member

    Try this one -> http://na.mirror.garr.it/mirrors/zeroshell/ZeroShell-1.0.beta13-CompactFlash-IDE-USB-SATA-1GB.img.gz

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.