I need to update two ZeroShbridgeell boxes one NAT one

› Forums › Network Management › ZeroShell › I need to update two ZeroShbridgeell boxes one NAT one

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 3, 2017 at 6:52 pm #44775
    cozzi@nd.edu
    Member

    I need to update two ZeroShell boxes. One has been running v 1.0.beta16 quite well for several years. I is running from the “LIVE” CD and writing profile info to the hard drive. It’s a non bridged NAT config. Will a new install of v3.7.1 be able to read the old v1.0.beta database/profile?

    The second box is running 3.6.0 and is a firewall bridge, no NAT. Same question about reading the database/profile info
    Many thanks,
    –marc

    April 3, 2017 at 8:24 pm #54422
    DrmCa
    Participant

    Marc,

    You can always take a backup of the profile and try, and go back if it does not work.
    I don’t know actually, as I went from 1.0 to 2.0 then 3.0 and now I am on 3.5, each time the backup profile was restored successfully and worked fine between 3 different machines.

    HTH 😳

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.