Installation stuck – help

› Forums › Network Management › ZeroShell › Installation stuck – help

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 29, 2007 at 8:28 am #40668
    webwarrior
    Member

    I got to page 11 of manual zeroshellEN.pdf, to activate the Captive Portal and tick the GW tickbox, then hit save button, when I lost connection, and now I cannot get back into it.

    Redirect when opening browser does not work either.

    Do I need to start all over again? How? I cannot connect to it at all!!!

    Help!

    June 29, 2007 at 10:00 am #45527
    webwarrior
    Member

    Note sure what I did wrong first time.

    June 29, 2007 at 4:08 pm #45528
    imported_fulvio
    Participant

    Put the system in Fail-Safe status by using a VGA o serial console. After you have corrected the problem you have to reboot to exit from this status.
    I think that the web login page does not work because you have not activated the authentication server before to activate the captive gateway.

    Fulvio

    June 29, 2007 at 8:22 pm #45529
    webwarrior
    Member

    The documentation says to first activate the Gateway, and then the Authentication server.

    We need to fix that.

    You are doing a great job!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.