LAN2 › Forums › Network Management › Networking › LAN2 This topic is empty. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts August 11, 2010 at 12:58 pm #42575 micampoMember LAN2 currently has three (3) network cards in my server ZS, what is the procedure for implementing a LAN2 with the eth2 network card? Thanks August 12, 2010 at 5:37 pm #50888 ppaliasMember Assign to the card an IP address and enable dhcp server on it. August 13, 2010 at 6:28 pm #50889 micampoMember and surfing the eth1 works without problem?…. 😯 August 18, 2010 at 12:45 am #50890 ppaliasMember I don’t see any reason why it shouldn’t work. Try it and if something goes wrong we can discuss it here. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In