Multiple WAN setup

› Forums › Network Management › ZeroShell › Multiple WAN setup

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 14, 2009 at 4:49 am #41398
    netsysadmin
    Member

    Hi all,

    I have just installed ZeroShell behind my ADSL modem/router.
    Everything is working fine now.

    I have 2 Internet connections and I need to route outgoing connections to these 2 WANs based on the source IP address and/or port.
    For example, all HTTP traffic has to go to the ADSL line and a few host machines need to always use the ADSL line.

    With ZeroShell as the gateway of the LAN, is it possible to implement the above solution?

    Any idea is welcome.

    January 14, 2009 at 8:10 am #47399
    ppalias
    Member

    Hi,
    yes it is possible for you to do that.
    Go to Network -> NetBalancer -> Balancing Rules.
    Here you can select the criteria based on which you will route the traffic via your multiple connections.

    January 14, 2009 at 12:12 pm #47400
    netsysadmin
    Member

    OK, that’s what I was looking for.

    Thanks a lot.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.