PCI Express Dual NIC

Forums Network Management ZeroShell PCI Express Dual NIC

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #42633

    Hello, I’m looking to see if anyone knows of a pci express dual nic that is definitely compatible with zeroshell. I’m hoping to purchase one off of ebay. I have dual nics built into the motherboard that I’m using but they don’t appear to be recognized by zeroshell. The motherboard only has one pci express slot, so I will definitely need a dual nic that is pci express if I can’t get the onboard nics to be recognized.

    If anyone has any tips on how to get my built in network cards to work, this is the platform that I’m using:


    The type of network card is as follows:

    2x Intel 82574L Gigabit Ethernet, Supports 10BASE-T, 100/1000BASE-TX,

    Also, I will be getting another motherboard for a different project soon that might be able to swap out for the motherboard I’m using for this project. It has built in “# 2x Realtek RTL8111C-GR Gigabit Ethernet
    # Supports 10BASE-T, 100/1000BASE-TX, “. Does anyone know if those nics are compatible with zeroshell?


    I was able to get the onboard nics to work thanks to this post:


    Also, the realtec nics in that other supermicro system work without any modification ( 2x Realtek RTL8111C-GR Gigabit Ethernet).


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.