PPPoE use 100% CPU in zeroshell 3.9.3

[Marco Locatelli]

Hello,
my new VDSL connection works at 90mbit/s down and 30mbit/s up. Zeroshell 3.9.3 use the modem in bridge mode with PPPoE passthrough.
Checking the speed with PPPoE session on Zeroshell bridged to the modem, I can reach 20mibit/s down and 20mbit/s up.
Checking the speed with PPPoE session directly on Modem/Router, I can reach the top speed.
Checking the speed with PPPoE session on a PC bridged to the modem, I can reach the top speed.

I run Zeroshell on a miniPC ALIX with a geode CPU at 500Mhz. https://www.pcengines.ch/alix2d3.htm
I got the same iussue with ZS 3.8.2 version (then I upgraded the system tu 3.9.3 version)

It’s an hardware limit?
How can I check PPPoE is working in kernel mode?

Regards.
Marco

• This topic was modified 2 years, 2 months ago by Marco Locatelli.
• This topic was modified 2 years, 2 months ago by Marco Locatelli.

[Author]

Posts