Static IP problems

› Forums › Network Management › ZeroShell › Static IP problems

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 11, 2007 at 10:51 pm #40800
    ajl37
    Member

    Has anyone had any problems with Static IP’s under DHCP.
    I am currently using Beta6. When I have set a range e.g. 192.168.1.0-192.168.1.255 and set a static IP of 192.168.1.100 to a specific MAC address, that card will happily pick up that IP address. However occassionaly I have had a couple of cards with different MAC addresses also pickup 192.168.1.100, any ideas?

    Thanks
    Andrew

    October 12, 2007 at 5:37 pm #45941
    imported_fulvio
    Participant

    You should not create static entries that are in the dynamic range.

    Regards
    Fulvio

    October 12, 2007 at 9:32 pm #45942
    ajl37
    Member

    @fulvio wrote:

    You should not create static entries that are in the dynamic range.

    Ah, my apologies, I misunderstood. I was trying to use the static section as a way of excluding addresses from the dynamic range.

    Thanks
    Andrew

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.