Trouble with Time Matching in Firewall

› Forums › Network Management › ZeroShell › Trouble with Time Matching in Firewall

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 12, 2009 at 12:28 am #41466
    LingaringBell
    Member

    The time that the Time Matching feature inside a firewall rule uses seems to not be the System time. For example, I have to set my Time Matching rules to 6 hours before the actual time I want them to run. Anyone know how to fix this? Thanks.
    -Bell

    February 12, 2009 at 5:43 pm #47599
    imported_fulvio
    Participant

    Using the web interface, from the section [Setup][Time], check if the Time Zone is correctly set.

    Regards
    Fulvio

    February 18, 2009 at 10:09 pm #47600
    LingaringBell
    Member

    I set the Time Zone correctly but it errors whenever I tell it to sync. I set the system time manually. Could this be the problem?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.