Hi!
Im running ZS on rpi3 b+ and after seting everything, it is working perfectly. That is, untill first or any other reboot.
So, in wifi manager i have listed phy0, phy1 and phy2. phy2 is integrated nic ant I’m not using it.
Initial setup is:
phy0
-WLAN00 –> SSID”wifi-1″, cliend mode, DHCP
phy1
-WLAN01 –> SSID”wifi-2″, client mode, DHCP
phy2
–
Both WLAN00 and WLAN01 are used as NAT and I plan to load balance them…
Once I reboot ZS I get no WiFi connections and this:
phy0
–
phy1
-WLAN00 –> SSID”wifi-1″, cliend mode, DHCP
-WLAN01 –> SSID”wifi-2″, client mode, DHCP
phy2
–
Of about 30 reboots, only once that didn’t happen.