Use Zeroshell as VPN with high upload speed in LAN

› Forums › Network Management › Networking › Use Zeroshell as VPN with high upload speed in LAN

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 16, 2012 at 11:50 am #43336
    Druidl
    Member

    Recently we bought this new network with 3Mbps/3Mbps to use for uploading, till now we had two networks with 20Mbps/128kb dual wan-ed on a Linksys RVO42 in load balance. I couldnt figure out how to merge this three connections, so I came up with an idea to set up a Zeroshell dummy to use as a VPN server inside our LAN, and when needed you just connect to it and use the 3/3 net.

    So,
    is it possible to set up an VPN on zeroshell, I would use it when I need to upload something. Normally I am connected over Linksys RVO42 with two 20Mbps/128kb, and the whole office. And when I need to upload something, I connect to this Zeroshell VPN and use the third network with 3Mbps/3Mbps.

    So the VPN would be connected to the LAN network and the 3/3 network?

    Is this possible and how comlicated is it to set this up?

    In advance, thanks!

    April 17, 2012 at 10:21 am #52319
    Druidl
    Member

    Come on, no one can figure this out? Yeah right, ur just lazy…

    April 18, 2012 at 5:02 pm #52320
    mgibbons
    Member

    @Druidl wrote:

    Come on, no one can figure this out? Yeah right, ur just lazy…

    Why do you not just change the def gateway when you want to upload?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.