What driver to use with VMware

› Forums › Network Management › ZeroShell › What driver to use with VMware

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 24, 2012 at 9:47 am #43474
    on
    Member

    Hi,

    I am trying to clone my running ZeroShell to a VMware machine.

    It’s for testing prupose: I have somewhat modified ZeroShell and I want to check the upgrade path before I does that on the production machine.

    So I cannot use the ready made VMware distribution, I really need to work it out from my own version of ZeroShell. Modifications are really minimal, but would disturb greatly my production environment if they disappeared. One of the modification was to add mpt drivers for Dell RAID.

    I am stuck to the probing USB and SATA nine times before kernel panic. So I guess this means a driver is missing.

    My VMware disk is seen as SCSI (/dev/sda).

    What driver(s) should be added to get ZeroShell to work?

    Best regards,

    Olivier

    October 25, 2012 at 12:59 pm #52510
    on
    Member

    The SCSI controller on the virtual machine should be defined as LSI Logic SAS and not as the default LSI Logic Parallel.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.