wifi-access point interface problems

› Forums › Network Management › Wireless Networks › wifi-access point interface problems

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 16, 2012 at 5:48 pm #43424
    pcm
    Member

    hello, I configured the access points Wifi with multiple SSID as described in the tutoriel found to this bond: ” http://www.zeroshell.net/eng/forum/posting.php?mode=editpost&p=11074 “. Then, after configuration the interfaces corresponding to the various SSID which I created are always down. Is my question to know how to activate these interfaces?
    Thank you in advance for your assistance.
    Pcm

    March 23, 2015 at 1:14 pm #52430
    Utteru
    Member

    I didn’t get you. What you want to ask please explain?

    May 6, 2015 at 10:08 pm #52431
    t3mporal
    Member

    I found something similar, that I could configure multiple SSIDs on the same device, but this made the AP unstable. Devices on Wifi would drop the connection and reconnect every 30 seconds or so.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.