Forum Replies Created
These are the steps that i did against the Zeroshell from earasing the file after next reboot.
1. I modified the script “3Gconnect” as you suggested (change string from “OK” “ATD$DIAL” to: “ERROR” “ATD$DIAL” ). and i copied it to /Database/preboot (i havet to create “preboot” directory first).
2. Then i put the command “cp /Database/preboot/3Gconnect /root/kerbynet.cgi/scripts/3Gconnect -a” into a preboot script area.
At Some area, My sierra modem can connect the internet at the speed almost 3.5 mb/s
Now I’m living in Thailand.
Thank you so much raf.
Finally i can connect to a real data port “ttyUSB0”.
HminkoongMarch 18, 2010 at 8:35 pm in reply to: Zeroshell With Alix6B2 and Sierra Wireless MC8780 3G HSDPA #47087
Do you have any download speed problems when you choose port “/udev/ttyUSB2” as a data port?
My download speed is limited to 1mb/s when i choose /udev/ttyUSB2 as dataport.
You can check at “www.speedtest.net”
If not, Could you please tell me if there’s any special configuration i need to do?
I’ve found the same problem as yours .
I’ve already upgrade the driver to v.1.7.30.
However i still can’t connect to port /udev/ttyUSB0.
Don’t know why?
Can you find other solutions for this problem ?
Thank you for your advice
Adding AT Command :
AT!SELRAT=01September 22, 2009 at 3:25 am in reply to: Does zeroshell support 802.11 super G (108 mb/s) or 802.11n? #48780
Actually i can’t see 802.11 super G standard from Wi-Fi menu list.
The problem has been solved. 🙂
It’s caused by network operator (not my configuration).
Thank you so much for your advice
After 5 day passed, i ‘ve not faced any problems..
Zeroshell working well..
Don’t know why?
Thank you for suggestion..
I will try and tell you the resultJune 22, 2009 at 7:32 am in reply to: How to enable Captive portal more than one interfaces? #48269
Thank you so much giancagianca
It’s work …. 😀June 21, 2009 at 3:32 am in reply to: How to enable Captive portal more than one interfaces? #48267
I added the new section for another Interface.
Unfortunately It doesn’t work… 🙁
I think this ‘s just one script and possible other scripts need to be modified.
Anyway thanks for your adviceJune 19, 2009 at 7:40 am in reply to: How to enable Captive portal more than one interfaces? #48266
Thank you so much guys..
Anyway i will tell you the result. After i try…June 18, 2009 at 1:56 am in reply to: How to enable Captive portal more than one interfaces? #48263
Thanks a lot giancagianca.
I will try and tell you the results.