[latimeria]

quite old topic and you maybe have already solved:
1- download 3.5.0 live install iso and burn it on a cd
2- insert your compact flash in a usb card reader
3- boot your pc from iso cd created with the usb card reader connected
4- choose A install manager from mask options
5- install zeroshell on compact flash following all steps proposed and shutdown when installation completed
6- insert your compact flash in your alix 2d13 and go

[latimeria]

Hi,
have a look at this thread https://www.zeroshell.org/forum/viewtopic.php?t=4234
solved and samba working after reboot on ZS3.0

[latimeria]

Hi,
we were discussing the same in the italian forum
http://zeroshell.net/forum/viewtopic.php?t=3764

I have entered this in the post-boot and now works; hope this helps

# Startup Script
ln -sf /Database/opt/x.x/packages/etc/smb.conf /etc/smb.conf
echo /Database/opt/x.x/packages/lib >> /etc/ld.so.conf
ldconfig
#service samba start
/Database/opt/x.x/packages/sbin/smbd -D -s /Database/opt/x.x/packages/etc/smb.conf
/Database/opt/x.x/packages/sbin/nmbd -D -s /Database/opt/x.x/packages/etc/smb.conf

[latimeria]

…..yes, I have this situation at home:
ZS working on an Alix 2D13 and dd wrt on a DIR300 wifi router; I tried to setup them with wds but ZS got freeze after few minutes ( maybe some bug in MadWifi drivers )…..also encryption was not good as only wep was working; then I decided to setup dd wrt as client bridge mode and ZS as AP station without wds enabled and it works greatly also with wpa2 encryption………not yet tried radius authentication

[Author]

Posts