Forum Replies Created
-
Posts
-
Hi, i have another solution:
Acces to the shell with putty and enter chsh
and enter /bin/bash
you now can acces zeroshell with winscp, this is not persistent after reboot.Here is an easy way :
http://www.guizmovpn.com/index.php?option=com_content&view=article&id=2&Itemid=2
Hello, i don´t know the solution for the closed popup, but if the problem is disconnection with the popup open, the solution is deactivate the energy saving in the wirelles client card.
Hi, the last post is not totaly correct, in the eth01 (activated in zeroshell captive portal) the captive portal works fine, can´t connect to skype.
but in the other eth04 captive portal the skype works with no login in captive portal, for make eth04 C P y make this http://www.zeroshell.net/eng/forum/viewtopic.php?p=4318&highlight=#4318 adding this:you must change only cp_start.
example.
iptables -A CapPort -i ETH02 -j CapPortACL
iptables -t nat -A CapPort -i ETH02 -p tcp –dport 80 -j CapPortHTTP
iptables -t nat -A CapPort -i ETH02 -p tcp –dport 443 -j CapPortHTTPS
iptables -t nat -A CapPort -i ETH02 -p tcp –dport $REMOTEPT -j CapPortGW
iptables -t nat -A CapPort -i ETH02 -p tcp –dport $REMOTESSL -j CapPortGWinsert this line ar bottom of cp_start
iptables -I SYS_INPUT 3 -i ETH02 -p tcp –dport 12080:12083 -j ACCEPT
for enable ETH02
for another interface change 3 with 4.
first interface (ETH01) is enable from web interface.In web interface you must select for Client Identity only ip address.
Any idea for close connection skype and more in the eth modified with this method.
Thank you
ok, but the problem is that in the same IP i can have the two type of clients, one with 3mb bandwitch and another with 1mb, this clients are separated on type of users
thank you
