msanders

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • in reply to: wireless identity validation problem #45473
    msanders
    Member

    Well good news, it worked. The problem was so easy; I am so ashamed not seeing it earlier. It was not zeroshell at all. So everything normal like the document said. The problem was that, the Linksys router has 3 MAC address coming out of it. One of them is LAN. In DD-WRT, it shows them clearly. That one has to be added to my firewall to have access to outside. Everything works perfectly after that.

    So easy, I can’t believe I never saw it.

    Thanks Fulvio for being so patient and trying to solve my problem.

    Mike

    in reply to: wireless identity validation problem #45471
    msanders
    Member

    Well I looked over everything. If I underestood you correctly, my setup is:

    zeroshell: green network: 192.168.1.230 gatway 192.168.1.1
    Accesspoint: Blue network: 192.168.1.240 gateway 192.168.2.1

    Blue can ssh to zeroshell, firewall shows that only these two ips are trying to talk to each other. UDP port 1812

    I am also posting to IPCops forum see anyone over there has any ideas.

    I was reading more and it seems to be normal for people to put both on different networks, actually recommended.

    I have put holes in firewall everywhere, nothing seems to work. Could it have anything to do with some kind of route I have to setup?

    Thank again,
    Mike

    in reply to: wireless identity validation problem #45469
    msanders
    Member

    Well, I installed DD-WRT, that went well, but it did not work. I tried everything. So I said to myself, what happens if I put both zeroshell and the wrt54g on same network, yes it works.

    So once on same network, I did netstat and I see whats established. UDP port 1812 between wrt54g and zeroshell. Once they are on seperate network, the same port gets established , but it does not work. So I am out of ideas.

    Maybe someone who has similar setup with two networks, could give me some ideas please. If such a setup is not possible, then I like to know. I could always put zeroshell on blue network which is my wireless network. Right now zeroshell is on green network.

    Maybe someone could answer this: If it is possible to have them on seperate network?

    Thanks in advance for any info,
    Mike

    in reply to: wireless identity validation problem #45468
    msanders
    Member

    I have double checked those and it looks fine, the ip is the WRT54G and the 31 characters key.

    What I am noticing which could be the problem is the linksys router, every day I come, I can not login to it, I had to reboot it, now today, no matter what I do, I can not login to it focurse no resets yet. I think either router or firmware is a problem, since I have already reset it rnough times, it is time for DD-WRT, I give that one a chance, it can not be worse than linksys oen firmware. If at that point it act crazy, then maybe it is time to buy a new router.

    Unless anyone has any other suggestion, I will change the firmware, try again and let everyone know the result which I am hoping to be positive.

    Thanks,
    Mike

    in reply to: wireless identity validation problem #45466
    msanders
    Member

    After activating logs under log menu, I go to logs, radiusd section, and it says “Ready to process requests.”

    But I don’t see anything else, I press referesh and nothing. Do I have to activate anything else to see more logs?

    Now I am wondering If I am connecting to radius server from the router?

    Anyway I can test these connections? My laptop is on the same network as my linksys router and I can ssh from laptop to zeroshell, so that tells me they can talk to each other since I opened all ports. or maybe the problem is laptop to router. I wish I would some kind of error here.

    Thanks,
    Mike

    in reply to: wireless identity validation problem #45464
    msanders
    Member

    Thanks for response.

    Well It doesn’t seem to be my problem. If I just got an error, that would be something, It just keep saying ‘validating identity’ for ever. I wonder if it is the firmware? Or the fact that it is on different network. I opened all ports between Linksys router IP and zeroshell IP.

    Anyone, any idea? I have wiped and re-tried zeroshell multiple times, I have reset the router, I have done all I could think of. I am wiling to put DD-WRT on, if something thinks that would help. Maybe if someone has gotten it to work with the default linksys router, could share their experiance. Also if your running your router and zeroshell on different network, maybe you could also help there.

    Thanks in advance,
    Mike

    in reply to: wireless identity validation problem #45462
    msanders
    Member

    I am also having a ‘validating identity’ problem, could you please tell me what your problem was, maybe I have the same.

    My setup is:

    Linksys wrt54G with linksys own firmware (latest) Version 1

    Seperate firwall, linksys on seperate network as zeroshell

    I have followed paul taylor’s document line by line, I am just not sure what is wrong. I have also tried different laopts with different wireless cards thinking it is hardware, and still no.

    Apppreciate any pointers, I have been spending countless hours and no result, I need some fresh ideas.

    Thanks,
    Mike

    in reply to: md5sum fails #45686
    msanders
    Member

    This problem is solved.

    The problem seemed to be IE. Each time I downloaded with IE, it somehow changed the file to over 500M. When I used FireFox, everything went fine, filesize and all match.

    Mike

    in reply to: Opinions Please? #45673
    msanders
    Member

    well the network is working. It looks like one network card is all I need. I am assuming since I am not really using firewall functionality and some other ones, I wont need the second network card.

    Please let me know if I am way off.

    Next I will do the hard drive setup. Once I get all working I will post my results.

    I have WRT54G router which I plan to use radius and cert authentication for my wireless equipment.

    I had radius setup in another linux server on its own, but I came upon this project, looked interesting, I thought I give it a try.

    Thanks,
    Mike

Viewing 9 posts - 1 through 9 (of 9 total)