staifan13

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 19 total)
  • Author
    Posts
  • in reply to: Zeroshell for Raspberry Pi and Orange Pi #54447
    staifan13
    Member

    Thanks a lot Fulvio . It is a very good news …

    in reply to: DHCP sevrer on VLAN #53439
    staifan13
    Member

    redfive,
    it’s that . I have a switch between ZS and the client . So I looked here and there on the web and I realized that most of the switch handle or not VLAN. So I lean over and thank you for the information.

    in reply to: DHCP sevrer on VLAN #53437
    staifan13
    Member

    It’s already done . In the log the DHCP server seems to work but the client doesn’t colect the IP .

    in reply to: How to Mount –bind at bootup ? #53428
    staifan13
    Member

    Hi zzrabbit,
    I don’t understand exactly what you want to do but I think your can find your solution into the script/cron tab on the setup . Into the pre or the post boot ….
    Staifan 13

    in reply to: Samba on 3.0 not working after reboot #53071
    staifan13
    Member

    Hey !
    I tested it and it works well 😀
    Thank you for it because I don’t watch the Italian forum because I don’t understand it …
    without your response I had never seen .
    thank you again and survive Zeroshell !

    in reply to: DLNA integration #53114
    staifan13
    Member

    Hello I will do this shortly … The next week .
    Stéphan

    as promised :

    cd /Database
    wget http://sourceforge.net/projects/minidlna/files/minidlna/1.1.0/minidlna_1.1.0_static.tar.gz/download
    tar -xzvf download

    decompressing archive create directories etc and usr/sbin where you are . In etc you will find minidlna.conf wich you have to edit like this (for example) :

    # port for HTTP (descriptions, SOAP, media transfer) traffic
    port=49200

    # network interfaces to serve, comma delimited
    network_interface=eth01,eth00 to adapt as appropriate

    # specify the user account name or uid to run as
    #user=jmaggard

    # set this to the directory you want scanned.
    # * if you want multiple directories, you can have multiple media_dir= lines
    # * if you want to restrict a media_dir to specific content types, you
    # can prepend the types, followed by a comma, to the directory:
    # + “A” for audio (eg. media_dir=A,/home/jmaggard/Music)
    # + “V” for video (eg. media_dir=V,/home/jmaggard/Videos)
    # + “P” for images (eg. media_dir=P,/home/jmaggard/Pictures)
    # + “PV” for pictures and video (eg. media_dir=AV,/home/jmaggard/digital_camera)
    media_dir=A,/media/Musiques to adapt as appropriate
    media_dir=V,/media/Films to adapt as appropriate
    media_dir=P,/media/Nos_documents/Documents_partages/Mes_images to adapt as appropriate

    # set this if you want to customize the name that shows up on your clients
    friendly_name=DLNA_sur_ZeroShell
    to adapt as appropriate

    # set this if you would like to specify the directory where you want MiniDLNA to store its database and album art cache
    db_dir=/Database/minidlna_1.1.0_static/log
    to adapt as appropriate

    # set this if you would like to specify the directory where you want MiniDLNA to store its log file
    #log_dir=/Database/minidlna_1.1.0_static/log

    # set this to change the verbosity of the information that is logged
    # each section can use a different level: off, fatal, error, warn, info, or debug
    #log_level=general,artwork,database,inotify,scanner,metadata,http,ssdp,tivo=warn

    # this should be a list of file names to check for when searching for album art
    # note: names should be delimited with a forward slash (“/”)
    album_art_names=Cover.jpg/cover.jpg/AlbumArtSmall.jpg/albumartsmall.jpg/AlbumArt.jpg/albumart.jpg/Album.jpg/album.jpg/Folder.jpg/folder.jpg/Thumb.jpg/thumb.jpg

    # set this to no to disable inotify monitoring to automatically discover new files
    # note: the default is yes
    inotify=yes

    # set this to yes to enable support for streaming .jpg and .mp3 files to a TiVo supporting HMO
    enable_tivo=no

    # set this to strictly adhere to DLNA standards.
    # * This will allow server-side downscaling of very large JPEG images,
    # which may hurt JPEG serving performance on (at least) Sony DLNA products.
    strict_dlna=no

    # default presentation url is http address on port 80
    #presentation_url=http://www.mylan/index.php

    # notify interval in seconds. default is 895 seconds.
    notify_interval=900

    # serial and model number the daemon will report to clients
    # in its XML description
    serial=12345678
    model_number=1

    # specify the path to the MiniSSDPd socket
    #minissdpdsocket=/var/run/minissdpd.sock

    # use different container as root of the tree
    # possible values:
    # + “.” – use standard container (this is the default)
    # + “B” – “Browse Directory”
    # + “M” – “Music”
    # + “V” – “Video”
    # + “P” – “Pictures”
    # if you specify “B” and client device is audio-only then “Music/Folders” will be used as root
    #root_container=.

    And then you can start the DLNA server with

     /Database/usr/sbin/minidlnad -f /Database/etc/minidlna.conf -R

    Of course you can paste it on Startup/CRON post boot to automaticaly start the server on startup .

    Enjoy !
    Stéphan

    in reply to: Samba on 3.0 not working after reboot #53069
    staifan13
    Member

    I have the same problem since i have installed 3.0 on my hard disk with the package manager …

    root@zeroshell Database> service samba start
    /sbin/service: line 6: /etc/rc.d/init.d/samba: No such file or directory
    /sbin/service: line 6: exec: /etc/rc.d/init.d/samba: cannot execute: No such file or directory
    root@zeroshell Database>

    Does anyone know how to turn around the problem ?

    mean while I just reinstall samba like this after a reboot :

    rm -rf /Database/opt/LICENSES
    rm -rf /Database/opt/x.x
    rm -f /Database/opt/updater
    cd /Database
    wget http://www.open-link.it/zeroshell/SMBXX_beta2.tar.bz2
    tar xjvf SMBXX_beta2.tar.bz2
    cd SMBXX_beta2
    ./install.sh

    Stéphan

    in reply to: Available package missing since fresh install #53191
    staifan13
    Member

    Ho sorry it’s so simple that I dont see it ! you juste have to press the check button
    Enjoy !
    A thank you again to Fulvio for it wonderfull distribution

    in reply to: Please help to understand how to configure proxy #52317
    staifan13
    Member

    what is your prefered language ?

    in reply to: DLNA integration #53112
    staifan13
    Member

    Hei,
    I use since a few month minidlna on zeroshell . it work fine 😉
    If you need some help don’t hesitate to tell me how about ….
    Stéphan

    in reply to: Accounting classes #52964
    staifan13
    Member

    Oops, sorry I was too fast. I founded the functionality in the ‘USERS’section . However, some things do not like me ‘Zerotruth’ such that the captive portal . If you set a wrong password or a wrong ID a window tells us the error with the user ID and password clearly displayed. Safety side I find it very low.
    Thank you anyway for your work and your help but I already uninstall it . I prefer waiting for the new feature appear in zeroshell
    Regards

    in reply to: Accounting classes #52963
    staifan13
    Member

    I just test Zertruth. This does not work … No available time slot …
    http://cjoint.com/13oc/CJwpuT72Pfh.htm

    in reply to: Accounting classes #52962
    staifan13
    Member

    Hello and thank you for your help,
    I know Zeroruth I already used a little . I’ll re-test but it but I should prefer that this function is native in Zeroshell ..
    Regards
    Stéphan

    in reply to: prohibit access to the sharing of printers, files … #50119
    staifan13
    Member

    Hello ppalias,
    I don’t know if you are always here but 4 years ago i would like to thanks you for your help . as we say: Better late than never.
    since all this time I was much scattered. So far my slows down the rendering is no longer valid
    thank you again .
    Cordialy
    Stéphan

    in reply to: prohibit access to the sharing of printers, files … #50117
    staifan13
    Member

    OK, so if I understand it I need to change the settings of my router. He is currently with with IP 192.168.1.2/255.255.255.0. I would have to configure for example : 192.168.1.2/255.255.255.252.
    So the DHCP server could assign only two IP on the same subnet . Is that?

Viewing 15 posts - 1 through 15 (of 19 total)